Windows 10 installation restarts. We use the Charms bar. Disabling startup and service components
Rebooting the system is necessary not only after installing drivers and various programs, but also in the case when the PC freezes or some kind of error occurs. However, in rare cases, it is quite difficult to perform it. The command line comes to the rescue, with which you can not only reboot the system, but also put the computer into sleep mode, forcefully terminate running programs.
Decoding the shutdown command for Windows 10
In the event that the user changes his mind about restarting Windows 10, the cancel command will be: shutdown / a.
After running the command, a message will appear in the notification window stating that the PC will not restart.
To completely shut down the computer without a timer, we recommend that you enter the shutdown /s /t 0 command.
Also in Windows 10, you can perform a number of other operations using the command line and the shutdown command. Let's highlight the main ones and decipher them.
If you type shutdown, a list of available operations will appear.
- shutdown /? - call for help.
- shutdown /i - display GUI user. This parameter must be the first.
- shutdown /l - end the session. Cannot be used with options such as /m or /d.
- shutdown /s - shutdown the computer.
- shutdown /r - shutdown and restart the computer.
- shutdown /g - shutdown and restart the computer.
- shutdown /a - Cancel system shutdown. This option can only be used during the waiting period.
- shutdown /p - shutdown local computer without warning. Allowed to be used with the /d and /f options.
- shutdown / h - activate hibernation mode. Allowed to be used with the /f option.
- shutdown /e – indication of the reason for the unexpected shutdown of the computer.
- shutdown /m - \computer Specifies the destination computer.
- shutdown /t xxx - set a delay of xxx seconds before shutting down the computer. Default value: 30 seconds. If the timeout period is greater than 0, the /f option is applied.
- shutdown /c - "comment" Comment with reason for restart or shutdown. The allowed number of characters is 512.
- shutdown /f - Forced termination of running applications without warning users. The /f option is used when the /t option is set to a value greater than 0.
- shutdown /d xx:yy - you must specify a reason for rebooting or shutting down, where p is a scheduled reboot or shutdown; u is the reason; xx – reason number; yy is the minor reason number.
These operations are suitable not only for Windows 10, but also for Windows 7, 8 and 8.1.
If the Windows operating system unexpectedly restarts without warning, or restarts when you need to turn off your computer, there may be several reasons for this. Windows may restart automatically and when certain system errors. A BIOS update can also resolve this error. The information in this document will be helpful in troubleshooting problems that cause your computer to restart unexpectedly.
If your computer restarts unexpectedly and then won't boot into Windows, you can find a solution to the problem in one of these documents:
As you know, in addition to the troubleshooting steps for unexpected computer restarts described in this article, you can update your graphics card drivers.
Windows OS restarts for no apparent reason
Follow the instructions in this document in the order in which they are presented to resolve the issue.
Step 1: Turn off the "Automatic restart" option to view error messages
Many errors in the operation of hardware drivers or operating system display their text on the computer screen before stopping work or turning off the PC. However, if the function automatic reboot is enabled, an error message may not be displayed even if an error has occurred. If this option is disabled, an error message will be displayed on the screen.
Follow these instructions to disable the automatic reboot feature
Step 2: Check for hardware failures
Hardware problems can cause your computer to restart unexpectedly. additional information For testing for hardware problems, see Testing Hardware for Problems .
Note.The reason for the failure is usually an increase in temperature inside the computer case. Over time, the cooling holes become clogged, which leads to an increase in the temperature inside the case. For more information, see Reducing the Temperature Inside Your Laptop for Notebooks or Preventing Your Computer from Overheating for Desktops:
Step 3: Update the BIOS
Updating the BIOS can fix problems with sudden shutdown of the computer. Follow the steps in the following sections to use HP Support Assistant, the HP website, or the HP SoftPaq Download Manager to check for and download any BIOS updates.
Using HP Support Assistant to check for a BIOS update
You can find a BIOS update using HP Support Assistant. If HP Support Assistant finds updated version BIOS, you can download and install it.
Download and install the latest BIOS from HP
In some cases, HP technical support may recommend downloading and installing a specific software package, or you may decide that you need to install a specific software package after reading another document. technical support HP. To manually find and load the BIOS itself new version, do the following.
After installing the updates, or if they are missing, proceed to the next step.
Using the HP SoftPaq Download Manager (Professional PCs only)
On professional computers, use the HP SoftPaq Download Manager to keep the system Computer BIOS up to date. To find and manually download the most current version BIOS, follow the steps below.
After installation is complete, open the utility, then click Show this PC. A list of available updates is displayed.
Click Select SoftPaqs, then click All in the drop-down list.
In chapter Downloaded SoftPaqs click Download , then follow the on-screen instructions to download and install the updates.
Step 4: Perform a system restore
If the problem is recent, you can resolve the problem by restoring your computer to a restore point before the time the problem started. For more information about using System Restore, see Using Microsoft System Restore in Windows 10 and 8.
Step 5Repair your computer
If there are no results after performing the other steps in this document, restore all software back to original state using system restore. Depending on the used Windows versions go to one of the following HP support documents for more information.
Most users, in order to reboot the operating system on their desktop computer or laptop, only one option is used. And they don’t even think about how to restart Windows 10 in a different way, and there are several more options for performing this operation.
Reboot ends all applications, games and processes launched by the user, which means that before carrying out the named operation, it is necessary to close programs, save open documents in which changes were made.
It is not recommended to resort to restarting the operating system installed on the computer using the "Reset" button. Too frequent reboot in this way can cause damage to the personal computer.
The most classic and well-known option is to restart Windows 10 using the Start menu. The user is required to do the following:
- Click on the "Start" button, which is located on the left side, at the bottom of the screen;
- Click on the item "Shut down";
- In the menu that opens with options for actions, you need to select - "Reboot".
In most cases, restarting a computer or laptop will take approximately 20 to 25 seconds. The exception will be those devices on which some heavy applications are in autoload.
WinX - to restart the computer
This method got its name from the combination of two keys on the keyboard "Win" + "X". By pressing these buttons at the same time, a special menu with functions will appear on the monitor screen.
This menu was first used in the operating room Windows system 8. The purpose of its implementation is to replace some of the settings and commands located in the Start menu. In order to restart the computer in this way, you need:
- Press the named keys, regardless of the language layout;
- Select the "Shutdown" section;
- A small menu with functions will reappear and there click on "Reboot".
Restart with "Alt" + "F4"
If the previous method has been used relatively recently, then the key combination "Alt" + "F4" on the keyboard has been introduced into the functionality of the system for a very long time.
It is necessary to make a reservation in advance that this method functions only if the user has switched to the desktop. If you call the shutdown command in the window of some program, then it will be closed.
To restart you need:
- Switch to desktop area, shutting down everyone running programs;
- Press two buttons on the keyboard: "Alt" + "F4";
- Select "Reboot" and then press "Enter" or "OK".
Every Personal Computer or the laptop can be turned off or restarted using the power button. To do this, you just need to correctly configure the execution of a specific command.
To make the setting:
- Go to the section with the power settings of the device;
- Go to the "Power button settings" category;
- Click on "Power".
Restart using the command line
All that we have presented above is rebooting Windows 10 using a hardware command, which is represented by a specific graphical interface. Our last way differs in that the command is not called in advance, and the restart process is carried out using the command line. For this you need:
- Launch a command line or Run dialog box;
- Enter the command "shutdown / r / t 00";
- Press "Enter".
This command has three values:
- Shutdown is the command to shut down the PC;
- /r is a function indicating to restart the device;
- /t 00 - this parameter sets the time until reboot (instantaneous).
We hope that the presented methods will be enough for you to properly restart the operating system. Windows systems 10.
And the last way in case of emergency - you have a button on the system unit, usually next to the Start button. It is smaller and less comfortable to press. This is done on purpose so that you do not accidentally press this key. Use it for an emergency reboot. In the case of laptops, this is far from being the case everywhere, but you can hold down the power button and then the device will turn off. It takes about 10 seconds. But both of these options are emergency.
None of the currently existing operating systems is immune from failures and errors. And Windows tenth version, despite its relevance, is no exception. And one of its problems is that sometimes Windows 10 restarts instead of shutting down. See below for how to fix this problem using various methods.
Instead of shutting down (Windows 10): what is the reason?
Even specialists who know the "top ten", as they say, up and down, often shrug. The fact is that the true cause of the spontaneous reboot is still unknown.
However, most experts are inclined to believe that this behavior of the system is due to NVIDIA graphics cards(more precisely, with their drivers) and failures in the operation of system components in unofficial versions of Windows.
As for drivers, the problem that Windows 10 restarts when shutting down can be solved by updating them normally (either in the Device Manager or using specialized programs like Driver Booster).
You can also try to remove all devices associated with NVIDIA graphics adapters (monitors, card drivers) and use the Found New Hardware Wizard to re-integrate these components into the system. Everything is simple here.
When the computer is turned off, it restarts. Windows 10: Enabling Clean Boot
More complex are situations when spontaneous reboot is associated with the incorrect operation of some services and components. If Windows 10 constantly restarts when shutting down, you should first pay attention to loading services.
To fix the problem, use the Run console (Win + R), where we enter the msconfig command. Here we select the "Download" tab. In the fields below, you need to deactivate all the elements, leaving only the minimum load line active and ticking the safe mode box. Save the changes and reboot the system.
Disabling startup and service components
If the problem that Windows 10 restarts when shutting down remains, then repeat the previous step and look at the Startup tab.
If it has any active services, uncheck all processes. But that's not all.
After that, for complete certainty, go to the "Services" tab and deactivate all lines in the same way (you can use the "Disable all" button located at the bottom of the window). We reboot the computer again and look at the result.
Power setting
If Windows 10 reboots again and again when it is turned off, try changing the installed power plan. To do this, use the appropriate section in the "Control Panel" (on laptops, you can enter it through context menu, invoked by right-clicking on the battery icon in the system tray).
We proceed to the section for setting buttons and entering a password, where we first deactivate the requirement to enter it when exiting sleep mode, and then uncheck the recommended inclusion line quick start. We save the changes and try to turn off the computer.
You can use the system registry editor (regedit in the Run menu), where we go down the HKLU branch through the SOFTWARE and Microsoft folders and reach the Explorer section. On the right side we find the CleanShutdown key, double-click to call up the options menu and change the value of the key to one (zero is set by default).
Next, open the HKLM branch and go down the tree to the WinLogon directory. On the right we find the PowerAfterShutdown key and in the same way as in the previous case, change the value of the key by one. This will allow you to completely turn off the power when you turn off the computer (even if the cord is inserted into the system unit or into the laptop connector).
Fixing an incompatibility issue with dynamic processor clocks
If all the above methods do not help, even if they are used simultaneously, the problem may be Windows incompatibility with the so-called dynamic processor cycles, the processing of which is enabled by default.
To deactivate processing, use the command line (cmd in the Run console), where the following is written: bcdedit /set disabledynamictick yes.
After that, we first reboot the system, and then try to turn off the computer using the standard method through the Start menu. If for some reason this service needs to be re-enabled, the same command is used, but with the “no” parameter.
BIOS firmware issues
Finally, the problem of spontaneous reboot may be due to outdated firmware of the primary I / O system BIOS. You can try to fix the failure by installing a new version preloaded from official resource developer, or at least reset the settings to default values. However, this situation is extremely rare, in most cases the above methods help.
Have you bought a computer with Windows 10 and want to know how it reboots, in addition to the classic methods that almost all Windows users are familiar with from the "seven" and XP? Today's article is devoted to solving this very issue. For which information was collected and systematized from many sites and forums, since Microsoft offers only a couple of methods for restarting the computer.
It would seem, why write an article on such a topic, because everyone has known everything for a long time. The fact is that most users use one or two methods of restarting the computer during its freezing or in order to clear the RAM from third-party services and applications, because after constantly switching the computer to hibernation mode, it starts to freeze, despite the abundance of free resources. Yes, and the shutdown menu was called in Windows 10 in a different way, not similar to other OSes. The information below is laid out to simplify the implementation of everyday routine operations in just one click.
Through the start menu
Microsoft gives exactly this way to restart the computer first, so let's start with the classics.
- Click on the Start menu icon, which is located in the usual lower left corner.
- Then click on the inscription: "Shutdown" in the drop-down miniature list of functions.
- We click on the inscription of the same name from the drop-down menu and wait for the PC to shut down.
Usually, its restart takes about 20-25 seconds if there are no "heavy" applications in the list of automatically launched ones.
To help your Windows 10 computer shut down faster, we recommend that you close the main third-party applications you use and save their work. First of all, this concerns various text, graphic and multimedia editors and office applications.
Through the WinX menu
This name of the menu was due to the combination of keys through which it appears on the screen. It appeared back in Windows 8 and is designed to replace some of the functions and system commands located at the start, the predecessors of which even in the main windows menu 10 never happened.
See also: Where is Windows 10 stored
Rebooting your computer using WinX is the easiest way.
- We clamp the specified combination of hardware keys for any keyboard layout.
- Select the drop-down item of the appeared menu "Shutting down ...".
- After that, a miniature list of shutdown commands will open, where we click on the one you need - “Reboot”.
- We are waiting for Windows 10 to complete the functioning of all active services, applications and start.
"Alt + F4" combination
Like earlier operating systems from Microsoft, Windows 10 also supports calling the shutdown dialog using the Alt + F4 hotkey combination.
Remarkably, the combination only works properly on the desktop. In most other cases, the action attached to the key set is responsible for sending the command to terminate the program or close the active window.
- We switch to the desktop. It is recommended not to minimize all programs, but to close them, as mentioned above.
- At the same time we clamp Alt keys and F4.
- Select "Restart" to restart the computer and press "OK" or "Enter".
Charms bar
Compared to the G8, Windows 10 does not have a Charms bar. But many users new tool liked it, because enthusiasts have released several utilities that implement its functionality in latest Windows.
- Install a third party app that returns Charms, such as PopCharms.
- Move the cursor to the upper/lower right border of the screen.
- Click on the shutdown icon.
In different versions and applications, both the icon and the inscription may differ slightly.
Computer power button
Any Windows computer 10 can be turned off by pressing the power button, if you set this action to perform the corresponding operation.
- We go into the power settings by any method (through the "Control Panel", search string).
- In the "Power button settings ..." item, set "Reboot".
- Press the "Power" button.
Command line
All of the above ways to restart the computer come down to calling a single console command with a couple of arguments through the graphical interface. Based on this, you can also restart Windows 10 using the command entered in the address bar of the command line, command interpreter, or file manager with support for executing system commands.
- Launch the command line or the "Run" window.
- Enter "shutdown / r / t 00".
Here shutdown is the shutdown command, /r is the argument indicating the computer is restarted, /t 00 is the setting of the time until the command is executed (instant start).
See also: Features of working in Windows 10
You can also restart your computer from Windows 10 classical method- using the "Reset" button located on the system unit. But it should be used only in cases of extreme necessity due to the high risk of harm. hard drive or sensitive elements motherboard.
(Visited 9 883 times, 30 visits today)
windowsprofi.ru
Turn off Windows 10 PC without mouse
woodhummer 1.04.2016 - 21:52 Workshop
Without a computer "mouse" it is unlikely that anyone will be able to imagine the work. Even such a seemingly very simple action as turning off the PC, many will not perform without a mouse. You may ask: why, in fact, turn off the computer only from the keyboard? Just imagine in wireless mouse the battery ran out ... Let's analyze this issue in more detail
4 simple ways to turn off the computer from the keyboard.
P.S.
We learned how to turn off a Windows 10 PC only with the keyboard, without using the mouse.
updated: 1.04.2016
leave a comment
wd-x.ru
How to use the keyboard to restart the computer
If the hardware fails due to a system failure, it can sometimes be very difficult to restart the computer (the mouse may not respond or Touchpad touchpad on a laptop). There are several ways to restart the computer using the keyboard, which will be discussed later.
Reboot Methods for Windows
You can restart a computer running the Windows operating system in several ways:
- second method. If a system failure paralyzed the computer almost completely (plus the equipment failed), then you need to call the task manager using the “Ctrl + Alt + Del” combinations.
In the top line you need to select "Shut down" and then the item "Restart". This method is intended for users whose PC is under Windows control xp.
Standard reboot method
The standard method for rebooting a computer is to use the arrow keys.
In order to do this, you need to perform several sequential steps:
- the first thing you need is to press the "Win" key (it is located between the Ctrl and Alt buttons);
- then you need to find the arrow keys on the keyboard (they are located at the bottom right side, between the standard and numeric keypads). You need to press the up arrow key "->" and then press the "Enter" key;
- then use the buttons with the arrows "" (Right) to activate the forced shutdown mode.
If applications were launched at the same time, a dialog box will appear where you will be prompted to end the running processes.
Video: Shutdown from the keyboard
"Ctrl" + "Alt" + "Del"
Another method that allows you to restart your computer using the keyboard involves using the Ctrl + Alt + Del command combination.
Restarting the system is carried out as follows:
Users Windows Vista and 7, when the dialog box appears, select "Completion options ..." (located in the lower right part of the dialog box) and select "Reboot" in the proposed list.
"Alt" + "F4"
You can restart your computer with Alt+F4.
To perform it in this way, you must sequentially perform the following steps:
- first you need to press the desired combination on the keyboard;
- then a small dialog box called "Completing Windows work". If the mouse fails to respond to commands, then use the arrows on the keyboard "Up" or "Down" to select the desired mode.
Win+C (for Windows 8/8.1)
For those users who have the Windows 8 / 8.1 operating system installed, you can restart the computer using the keyboard using the Win + C combination.
The course of action includes:
- dial the desired combination "Win + C";
- will appear on the right side of the screen side panel;
- select "Settings" in the sidebar;
- then the "Options" panel will appear, on which you must select the "Shutdown" icon at the bottom. If the mouse does not respond to commands, then the transition to the "Shutdown" icon must be carried out using the "Up" or "Down" arrows;
- after clicking on the “Shutdown” icon, a context menu will appear where you need to select the “Reboot” mode. As mentioned in the previous paragraph, if the mouse stops responding, then navigation is carried out using the arrow keys and the "Enter" key.
Command line
You can reboot not only with the help of key combinations, but also through the command line. This option is suitable for owners of operating systems Windows XP/Vista/7/8 and 8.1.
To restart the system through the command line, you must perform a series of sequential actions:
- after the command line window appears on the screen, you must enter the following commands: “shutdown -t 0 -r –f” (“-r” - is responsible for restarting the system “-f” - the parameter is responsible for forcibly stopping all running processes, the “-t 0” command is responsible for an instant reboot without closing processes);
- then press the Enter key to confirm your selection.
The second option to restart via the command line is as follows:
- First you need to open a command line window. Calling methods have been described above;
- then enter the following command "ping -n 0 127.0.0.1>nul&wmic OS WHERE Primary="True" Call Win32Shutdown 6" and press the "Enter" key.
The third method is only suitable for the Windows XP operating system:
- first you need to call the command line;
- then enter the command "rundll32 user.exe, ExitWindowsExec 2" and press "Enter".
Seen: How to quickly turn off the PC
How to restart the computer using the keyboard if it freezes
You can restart your PC not only with the mouse, but also with the keyboard.
During operation, the PC may freeze, for example, due to a lack of memory, in which resource-intensive applications simply grab random access memory. Another reason for freezing can be a system crash, which occurs due to driver conflicts, registry errors, or applications not functioning properly.
Partially
In the event that the computer freezes only partially (that is, some equipment, such as a mouse, responds to commands), you can restart using standard methods:
Through the start menu:
- in the lower left part of the screen, you must click on the "Start" menu icon or call it with the "Win" key;
- then select "Shutdown" at the bottom and click on the restart item in the drop-down list.
"Ctrl+Alt+Del":
- you need to type the desired combination on the keyboard;
- then a dialog box will appear, in which at the bottom right side you need to select "Shutdown Options" and click "Restart" in the drop-down menu.
- first you need to type the combination "Alt + F4";
- then the window "Shut down Windows" will appear;
- then you need to activate the "Reboot" mode.
Fully
In the event that the operation of the computer is completely paralyzed, and the mouse does not obey, it is necessary to use more radical methods of restarting the hung computer.
"Ctrl+Alt+Del":
The second way is to press the "Reset" key on the front side of the system unit. This method is the most radical of all existing, as it entails the complete loss of unsaved data. It will be relevant only if the computer freezes completely, and the equipment (keyboard and mouse) does not respond to commands.
This article looked at ways to restart your computer using the keyboard for each version of the Windows operating system. These methods will be useful in cases where the computer freezes and the hardware fails.
proremontpk.ru
Restarting a computer, laptop
Good day.
You may need to restart your computer for a variety of reasons: for example, so that changes or settings in Windows (that you recently changed) can take effect; or after installing a new driver; also in cases where the computer starts to slow down or freeze (the first thing even many experts recommend doing).
True, it is worth recognizing that modern versions of Windows need to be rebooted less and less, not like, for example, Windows 98, where after every sneeze (literally) you had to restart the machine ...
In general, this post is more for novice users, in it I want to touch on several ways how you can turn off and restart your computer (even in cases where standard way does not work).
1) The classic way to restart the PC
If the START menu opens and the mouse "runs" around the monitor, then why not try restarting the computer yourself in the usual way? In general, there is probably nothing to comment on here: just open the START menu and select the shutdown section - then from the three proposed options, choose the one you need (see Fig. 1).
Rice. 1. Windows 10 - shutdown/restart PC
If the mouse does not work (for example, the cursor does not move), then the computer (laptop) can be turned off or restarted using the keyboard. For example, you can press the Win button - the START menu should open, and select (using the arrows on the keyboard) the shutdown button in it. But sometimes, the START menu also does not open, what to do in this case?
Press a combination of the ALT and F4 buttons (these are the buttons to close the window). If you are in any application, it will close. But if you are on the desktop, then a window should appear in front of you, as in fig. 2. In it, using the arrows, you can select an action, for example: reboot, shutdown, exit, change user, etc., and execute it using the ENTER button.
You can also restart the computer using the command line (for this you just need to enter one command).
To launch the command line, press the combination of the WIN and R buttons (in Windows 7, the run line is located in the START menu). Next enter cmd command and press ENTER (see fig. 3).
Rice. 3. Run command line
IN command line you just need to type shutdown -r -t 0 and press ENTER (see Figure 4). Attention! The computer will restart in the same second, all applications will be closed, and no saved data will be lost!
Rice. 4. shutdown -r -t 0 - immediate reboot
In general, it is best to resort to this method as a last resort. With it, you may lose unsaved information after rebooting in this way - often Windows will check the disk for errors and so on.
Computer
On the case of the most common classic system unit, usually, the Reset (or reboot) button is located next to the PC power button. On some system units, to press it, you need to use a pen or pencil.
Rice. 5. Classic view of the system unit
By the way, if you do not have a Reset button, you can try holding it for 5-7 seconds. computer power button. In this case, usually, it will simply turn off (why not reboot?).
You can also turn off the computer using the power on/off button next to network cable. Well, or just remove the plug from the outlet (the latest option and the most trouble-free of all ...).
Rice. 6. System unit- back view
On a laptop, most often, there is no special. reset buttons - all actions are performed by the power button (although on some models there are "hidden" buttons that can be pressed with a pencil or pen. Usually, they are located either on the back of the laptop or under some cover).
Therefore, if the laptop freezes and does not respond to anything, just hold down the power button for 5-10 seconds. After a few seconds - the laptop will usually "beep" and turn off. Then it can be turned on normally.
Rice. 7. Power button - lenovo laptop
You can also turn off the laptop by unplugging it and removing the battery (it is usually held by a couple of latches, see Fig. 8).
Rice. 8. Battery release latches
5) How to close a frozen application
A hung application may "prevent" you from restarting your PC. If your computer (laptop) does not restart and you want to calculate it to check if there is such a hung application, then it can be easily calculated in the task manager: just note that "Not responding" will be written opposite it (see Fig. 9).
Remarque! To enter the task manager - hold down the Ctrl + Shift + Esc (or Ctrl + Alt + Del) buttons.
Rice. 9. The Skype application is not responding.
Actually, to close it - just select it in the same task manager and click the "End task" button, then confirm your choice. By the way, all data in the application that you forcibly close will not be saved. Therefore, in some cases it makes sense to wait, perhaps the application after 5-10 minutes. droop and you can continue to work with it (in this case, I recommend immediately saving all the data from it).
I also recommend an article on how to close an application if it freezes and does not close (the article also explains how to close almost any process): http://pcpro100.info/kak-zakryit-zavisshuyu-progr/
6) How to restart your computer in safe mode
This is sometimes necessary, for example, when a driver was installed - but it did not fit. And now, when turned on and Windows boot- you see blue screen, or do not see anything at all :). In this case, you can boot into safe mode (and only the most basic software that is needed to start the PC is loaded in it) and remove all unnecessary!
In most cases, in order for the Windows boot menu to appear, you need to press the F8 key after turning on the computer (moreover, it is better to press it 10 times in a row while the PC is booting up). Next, you should see a menu like in fig. 10. Then it remains only to select the desired mode and continue downloading.
Rice. 10. Option to boot Windows in safe mode.
If you can’t boot (for example, you don’t have such a menu), I recommend that you read the following article:
http://pcpro100.info/bezopasnyiy-rezhim/ - an article on how to enter safe mode[relevant for Windows XP, 7, 8, 10]
That's all for me. Good luck to all!
pcpro100.info
Windows 10 Secret Reboot Mode - Emergency Reboot.
Windows 10 has a secret reboot mode called "Emergency Reboot". When performing an Emergency Restart, Windows forces all running applications, you won't see any warnings about saving your work. This method of restart can be useful if you have any problems with applications or system freezes, and you would like to quickly restart your computer for normal system operation.
How to perform an emergency restart in Windows 10.
To perform an emergency restart Windows 10 you need to do the following.
Press Ctrl + Alt + Del on your keyboard. This will take you to the security options screen. From this screen, you can launch the Task Manager application, change your password or lock your computer, etc.
In the lower right corner of the screen, you will see a shutdown button. Press and hold the CTRL key on your keyboard, and then click on this shutdown button.
That's all. Windows 10 will warn you that it will perform an emergency restart. Press the OK button to confirm.
Keep in mind that this works almost exactly like hitting the reset button on your PC case, so save all your unsaved documents and applications before trying this feature. This works on Windows 8 too.