Iphone fell into the water what to do. Rescue iPhone, iPad or iPod touch after falling into water. Convert slow motion video to normal
The fall of a gadget worth a thousand dollars into the water is a real tragedy for the owner. In front of his eyes, an impressive bill should immediately appear, which will be presented by the repairmen after the “resuscitation” of the device, if it turns out to be possible. In such a situation, greed often takes precedence over common sense, and then the owner of the "drowned" begins to "dig" on the Internet, trying to find "folk" means of removing moisture.
To assert that there are no effective methods of "folk treatment", of course, not a single qualified specialist will undertake. At the same time, every master will confirm that most of the tips that are found on the Internet are given by amateurs and can only push the iPhone to “death”. There is a list of mandatory actions that the owner of a “flooded” iPhone must perform; going beyond this list and the desire to take the initiative leads to a huge risk.
For many users, it will probably be a discovery that water is far from the most dangerous liquid for mobile devices. The salts and minerals contained in the water have a negative effect on the technique.. They are chemically active substances and, when oxidized - that is, when they come into contact with oxygen - damage the structure of the metal.
The danger of a liquid for equipment can be judged by the pH indicator - acidity level(or pH). The lower the pH, the more dangerous the environment. Water is a completely neutral liquid - its pH value is 7. Liquids with a higher level of acidity are usually alkaline. For the iPhone, they pose the least threat.
You need to know the enemy in person - what kind of liquids can instantly destroy the gadget?
With long-term contact with the listed substances, it will be impossible to save the gadget.
On the contrary, they are almost harmless to the smartphone. from the point of oxidation sea water(pH = 8.0), ammonia(pH = 11.5), bleach(pH = 12.5). Distilled water is completely harmless, from which all salts and minerals have been completely removed.
Oxidation of smartphone elements is not the only danger. It should be remembered that water is an excellent conductor of electricity. That is why the penetration of liquid into the body can provoke short circuits, which will be repeated until the power is turned off entirely. Even one circuit may be enough to “fry” a couple of microcircuits - a few such circuits will definitely send the gadget “to the next world”.
It depends on how quickly and accurately the owner of the iPhone will act, whether he will be able to “reanimate” the device.
Dropped iPhone in water - what to do?
To save the "apple" gadget from the destructive effects of water, you need to follow this algorithm of actions:
Step 1. Take your smartphone out of the water immediately. It is obvious: even 10 seconds of being in liquid can be "deadly" for the iPhone. After 40 seconds there is no chance to save the device.
Step 2. Turn off your iPhone - this way you will protect it from short circuits. If you have a screwdriver Pentalobe, disassemble the device and remove the battery.
Step 3. Remove the cover, if there is one - moisture has probably accumulated under the accessory. It is not necessary to remove the film: it is worth doing this only if there are water bubbles.
Step 4. Dry your iPhone - remove visible moisture with napkins or other improvised means. You can use a cocktail straw to suck water out of holes and connectors.
Step 5. Check moisture indicators. On iPhone 3GS, 4 and 4S there are two: the first is located in the headphone jack, the second is in the dock connector. On devices of the 5th and 6th modifications, there is only one sensor, and it is located in the SIM card slot.
Image: harvestcellular.net
In the normal state, the indicators are white. If the sensors are red, water got inside. What does it mean? First of all, you can say goodbye to the guarantee.
Moisture sensors are the first thing to look at when buying a handheld gadget. Our site gives other recommendations,.
Step 6. Take "feet in hand" and go to the repairmen.
It will be much cheaper for the user to insure against a possible flood of the iPhone than to eliminate the consequences of the fact that the iPhone fell into the water. In many networks of mobile phone stores, you can find waterproof cases for apple devices for sale at an affordable price. Wearing such a cover every day is problematic due to its impressive size, but if you plan to visit the beach or sauna, you should resort to its help.
Is it necessary to go to the service?
If a user inadvertently spilled a glass of water on a smartphone and immediately dried the device, he does not need to contact a service center: such short contact does not pose a significant threat. The user should leave the iPhone turned off for several hours (so that the moisture completely evaporates), then try to “start” the gadget. Now, if the device does not turn on, this is a reason to "sound the alarm."
Another situation: the owner of the iPhone came to the beach, ran into the water, and only after that he discovered that he had forgotten to remove the mobile device from the pocket of his shorts. In such a situation, you can no longer do without contacting a service center.
You need to go directly to the repairmen, and not to the salon where the iPhone was purchased. The seller will refuse to repair under warranty - the owner of the device will only lose precious seconds.
You will definitely have to pay: only factory defects are eliminated free of charge, but not the consequences of the user's negligence. Another thing is that iPhone owners tend to exaggerate the amount that, in their opinion, the restoration of the "apple" gadget will cost. No one will present a five-figure bill - the price of such a repair will be a maximum of 4 thousand rubles for the iPhone 5 / 5S and 6 thousand rubles for the iPhone 6th modification.
In any case, it is recommended to contact the repairmen for diagnostics - even if the iPhone looks to be working perfectly and is not “buggy”. Water penetration into the hull can cause rotting, the consequences of which the user will notice only after a couple of months.
Common symptoms of decay are:
- Rapid battery discharge.
- Loss of screen sensitivity.
- Problems with Wi-Fi module.
- The speaker does not work - the sound is completely gone or is very quiet. Water, penetrating through the protective mesh of the speaker, immediately enters the membrane. Dust begins to accumulate on a wet membrane. Even if you manage to remove moisture from the speaker (for example, using a cocktail straw), the dirt will remain - it will form a soundproof barrier. The speaker is one of the most vulnerable components of the iPhone.
Diagnostics in the service center will cost 500-800 rubles. Most likely, this service will generally be provided free of charge if you agree to a subsequent repair in the same organization.
What should not be done if the iPhone fell into the water?
Whatever advice given by "pseudo-experts" on thematic forums, when flooding the iPhone, in no case should you do the following things:
- Use a hair dryer to dry. Yes, the flow of warm air will accelerate the evaporation of moisture, but at the same time contribute to the destruction of internal components.
- Wrap your iPhone in towels. By “wrapping” the gadget, you will only achieve that the humidity inside the case will increase - therefore, you will push the iPhone to death.
Leaving a smartphone in a container of rice for 24 hours is also a so-so way.. Rice is an excellent absorber of moisture - there is no doubt that cereal will rid the iPhone of liquid residue. However, remove salt and mineral crystals that already settled on the elements of the device, rice will not be able to, which means that it will not prevent the oxidation reaction.
Image: ios-data-recover.com
In addition, when you take the iPhone out of the rice, you will find that all the holes are clogged with grits. If you still decide after applying such a “folk method” to take the gadget to the workshop, be sure that there you will be remembered with an unkind word more than once.
Conclusion
When flooding an iPhone, it is strongly recommended to visit a service center - at least for the masters to carry out diagnostics. It is highly likely that the consequences of "bathing" will not appear immediately, but after a few months - the repairmen neutralize such a risk. It is not worth replacing the qualified help of specialists with “folk methods of treatment” - most likely, you will only harm the device more.
If you want to completely avoid the worry that your "apple" gadget will suffer from water, you should purchase an iPhone 6S or 7. Both devices are protected from moisture to a different extent: the 6th iPhone is calmly kept under water for 10 minutes, 7- Oh, I'm not at all afraid of liquids.
Apple has long been an outsider in the trend of the mobile market - moisture protection. In 2014, the main competitor of the iPhone, became the proud owner of IP67 (protection rating). Apple first used this technology only in the iPhone 7.
The phone received protection according to the IP67 standard, which provided, according to Apple, a painless short-term immersion to a depth of up to 1 meter. However, Apple does not exclude the possibility of moisture getting into the device after a year of operation and disclaims responsibility for possible consequences.
Thus, if the iPhone fell into the water and failed, then, unfortunately, you should not count on warranty repairs. This behavior of the company is quite logical, because between water resistance and water resistance, you can not put an "equal" sign.
Water-resistant devices are devices that can retain moisture only under certain conditions and for a fairly short time. Only gadgets with a degree of protection IP68 are called waterproof.
Despite the introduced standard of protection in the latest Xs, this does not save them. We are regularly contacted by the owners of the latest generations of a smartphone that drowned in the bathroom.
What happens after drowning an iPhone in water?
Why is contact with liquid so dangerous for electronic devices? To answer the question, let's dig a little deeper and get acquainted with the cause and process of oxidation.
Your iPhone fell into the water, what happens to the surface of the motherboard at this moment? According to international standards, lead-free soldering is used in Apple products, then all soldered elements of the board and cables are much more susceptible to destruction when exposed to aggressive environments, including water.
It is by nature a conductive liquid. All elements (Microcircuits, SMD components of the board and cables) are under voltage. As a result of hydrolysis and extensive short circuits, these components are rapidly oxidized and destroyed. The result of this is the failure of the electronics.
Therefore, if contact with the liquid nevertheless occurred, it is necessary to immediately clean the iPhone from moisture.
Steps to take if water gets into your iPhone:
So, what to do if the iPhone fell into the water?
- - Wipe the iPhone from the liquid, if possible, shake out the remnants of the connectors.
- -Next, turn off your iPhone. By doing this, you will reduce the load on the motherboard, but it should be borne in mind that many elements are still powered by the battery.
- - Do not connect the phone to the charger, this action will speed up the oxidation process.
- - Contact a service center for cleaning as soon as possible, as the only way to stop corrosion is to disconnect the battery from the board and clean it with a special compound that removes oxidation.
The situation is greatly aggravated if the iPhone fell into water mixed with salts, for example, into the sea.
Independent solutions.
The Internet is full of various tips on how to dry an iPhone at home, but these are delusions that do not help in this situation, but only waste valuable time. If you delay the visit to the workshop, corrosion will destroy even more elements on the motherboard.
- - Pilaf from iPhone
The first and most common "harmful" advice is to put your phone in rice. We have no doubt that the culinary skills of most of you are at their best, but you should not cook such an exotic dish.
No matter how hygroscopic the rice is, it will not draw moisture out of the micron gaps between the microcircuits and the board, where the liquid can easily penetrate.
- - From apple to dried fruit
The second myth is that it is enough to dry a wet gadget with a hairdryer or put it on a battery.
Of course, all this contributes to the evaporation of moisture, but the process is so slow that during the "drying" moment will be missed and the board can rot significantly. In addition, using a hair dryer or other heating devices can easily damage the electronic components or the display of the phone.
It is impossible to eliminate the consequences of moisture ingress into the device on your own. What to do if the iPhone fell into the water? The answer is always approximately the same: iPhone in hand, hands in feet - and run to the nearest PlanetiPhone service center. Entrust the solution of the problem to specialists.
Why PlanetiPhone?
Our service has a number of advantages over competitors, these include:
- - The lowest price for the repair of Apple equipment in Moscow.
- - Free diagnostics, even if you decide to postpone repairs until later.
- - Free departure of the master within the Moscow Ring Road.
- - Only original spare parts that are always in stock.
- - Impressive experience of specialists and modern equipment.
Looking for a reliable Apple Service Center?
90 days
repair warranty
Free diagnostics
devices
Repair price
Will not change
Service network
near the subway
Repair at the client
in 25 minutes
100% quality,
new details
Can iPhones get wet?
The iPhone 6 or 6s, like any other electronic digital device, must be kept away from water, otherwise there is a high probability of a serious breakdown, the repair of which can be very expensive in the future. There is no special protection against moisture on such a device, and if the user flooded it, then water ingress is not limited to the upper part of the case - it penetrates inside and oxidizes all vital parts.
iPhone 6s, 6 power button not working, how much does it cost to repair
What to do if the iPhone 6s, 6 fell into the water
If, nevertheless, the iPhone 6s fell into the water and got wet, then the first thing to do is to get it out as soon as possible. The faster the smartphone is in a dry place, the less consequences there will be. As soon as the gadget is removed from the water, you need to inspect it and dry it.
If the user dropped his smartphone into the water and noticed it only after a long time, then it will be very problematic and expensive to save such a drowned gadget, since the corrosion process is most likely started.
How to dry?
First of all, the gadget that got into the water should be put on a clean, dry surface and left for at least a day. The next day, you can inspect the phone and try to evaluate its performance.
As practice shows, a gadget that just dripped or accidentally spilled water will work fine. The same cannot be said about a smartphone that has sunk and is completely wet, including internal parts. If the iPhone 6 fell into the water, it will need a deep cleaning and, possibly, the replacement of some elements, which must be done in the service. Find out more about iPhone 6s repair.
Wet iPhone Problems
If the smartphone turns on after drying, then this is a good sign, perhaps there is a chance to do without a visit to the service center. When the device is fully loaded, you need to check the camera, speaker, microphone and connectors. Visually inspecting the connector is quite difficult, so you should connect the charger and make sure that charging is in progress. If the charging process has not started, then most likely moisture has got into the connector, and the smartphone needs to be repaired.
Many users ask the question - iPhone 6s fell into the water, what should I do if it turns on, but it does not work well and constantly freezes? There is only one solution here - take it to a service where specialists will establish the cause and help restore the smartphone. The price for iPhone restoration will depend on which item was damaged.
Also, frequent consequences of water ingress are the appearance of stripes on the screen. Read more about what to do if, read on our website.
What to do if there are drops of water under the glass?
Also, some users are interested in how to fix the situation if the iPhone 6 fell into the water, what to do when liquid got under the glass.
The fact is that the display on the iPhone is designed in such a way that it will not work to remove it yourself. This requires special tools. Therefore, the only thing left to do is to take the phone to a service center as soon as possible.
Trust the professionals!
InApple service centers are located 1 minute from metro stations, we repair iPhone 6s or 6 quickly and efficiently. While our specialists are restoring your gadget, you can enjoy delicious aromatic coffee. All repairs take no more than 40 minutes. Come and we will bring your iPhone back to life!
Russian folk wisdom says - "the cooler the SUV, the farther to follow the tractor." The proverb can be attributed to modern smartphones, the more complex the gadget, the more expensive its restoration. Today we will try to answer in detail the question of what to do if your favorite iPhone fell into the water and stopped showing signs of life. I’ll note right away that the faster you act after water has entered the device, the more likely it is to dry it properly and restore working condition.
Myths and reality
There is a strong opinion that the faster you put a phone that has fallen into the water into rice, the easier and cheaper the repair will be. You will be upset, but this is just a myth, rice will not help if the iPhone fell into the water and does not want to turn on. The method can help, but only if you “gut” the iPhone 4 and take out all the microcircuits, put them in a jar of rice for 12-24 hours. Only in this case is it likely that a miracle will take place. Let's leave the myths and move on to reality, consider some really working tips for recovering a phone that has been in water. Let's answer the main question: what to do if the iphone fell into the water?
Independent resuscitation in case of water ingress
All of the steps below are equally well suited for all Apple phones, whether it's an old iPhone 4 series, or an upcoming iPhone 8, not to mention the 5, 5s, 6, 6 plus and 7 series. The equipment from the USA is good, but not well adapted to the aquatic environment, however, like other electronics. The only ones who have taken care of water protection are Korean and Japanese brands, Samsung and Sony. But even then, the protection is more formal than really working. They will save you from splashes and light immersion, but hardly from serious pressure drops. Therefore, for a very long time, the described methods will be working and in demand.
- Calmly and without fuss, we take out the iPhone after bathing in the bathroom, toilet bowl, sink (underline as necessary). If the gadget spent no more than 3-5 seconds under water, you should not worry, 90% of which will restore full functionality. After 10-20 seconds, after the iPhone fell into the water, the probability of a painless recovery rushes to zero.
- Is your smartphone still alive after water? Power off immediately
- After water, the device does not turn on? Most likely there was a short circuit and you need to act quickly.
- If possible, we try to disassemble the case, it is advisable to remove the battery, but this is not so easy on an iPhone 4, a specialized tool is needed.
- We wipe the device, not forgetting about the connectors, they can accumulate up to 30% of all moisture.
Sea water, electronics' worst enemy
Whether it is possible to reanimate an iPhone after falling into salt water will depend on your luck. Salt water, the worst thing that can happen to your electronic friend. Salt and impurities contained in the water will have an extremely negative impact on both the circuit board contacts and the iPhone screen. 90% that you now have an expensive brick in your hands, but you should try to contact a good service, 10% still remains, but you need to hurry.
Bathing in the washing machine
Is it possible to restore the device after it has sunk in the washing machine? It's 50/50, maybe yes, maybe not. It’s too late with emergency actions, you shouldn’t panic and break the washer, otherwise you will be left with two dead devices in your hands. We calmly stop the washing process, or wait for it to complete, do not forget the tested iPhone at home with water and go, no we fly, to the service center.
Drowning in other interesting liquids
Did your favorite iPhone fall into the toilet? Wet your phone with beer? Filled iPhone with tequila? The actions are exactly the same as if you drowned the iPhone in plain ordinary water, with the exception that the repairmen will have to pay even more for cleaning the chips from sticky and / or fetid masses. Editorial tip - next time, don't take your brand new iphone 7 to the toilet with you, leave it under the supervision of friends and a few mugs of beer.
Step by step actions, for those who are not ready to take risks
Dropped your iPhone in water and your iPhone got wet? Don't know what to do? Can't remove the battery yourself? Then we go to you!
- We immediately turn off the device, while the phone that has fallen into the toilet is still showing signs of life.
- We wipe dry and try to shake out excess moisture, but do not overdo it!
- We run to the nearest good Apple repair service
- We loudly tell the servicemen what exactly the iPhone drowned in, so that they would know how to wipe the flooded microcircuits.
Actions for risky
What to do if the iPhone fell into the liquid, and your hands are growing from the right place? Then we forget about the risk of losing the precious iPhone, on the fronts of the battle with the liquid that got inside, and proceed to warm up the phone. Video instruction is attached.
- We weigh all the risks, read the last part of the article and proceed
- To do this, we need a building hair dryer, in extreme cases, a regular household hair dryer will do.
- If possible, we disassemble the iPhone as much as possible to allow warm air currents to get into the most remote corners of the chips.
- We turn on the heating to the very minimum and direct it to the experimental drowned man
- It is quite possible that this will help to avoid oxidation of the contacts and the phone will work properly.
Consequences of improper drying
If you do everything quickly and do not panic, you can not read this section of the article. Especially for those who know life and are not in a hurry, they will give examples of glitches and microcircuits that died from water, how to deal with photo and video examples.
- iPhone battery drains quickly
- The WiFi module loses connection or does not see nearby networks;
- The iPhone screen does not correctly process touches on the sensor;
- Some functions do not work, for example, "modem mode";
- Other problems that are difficult for servicemen to predict.
Video instruction
When the summer holiday season is in full swing, it's not only sunny weather, but also a time when phones, tablets and music players fall into the water.
Apple devices are no exception, in particular iPhone 6, iPhone 5, iPhone 7, iPhone 5, iPhone 5s, iPhone 4, iPhone 6s, iPhone se, iPhone 8, iPhone 6 plus and so on.
Therefore, this text was created so that people who seek help after their iPhone fell into the water do not follow the advice of pseudo-specialists.
Here I have collected the most common mistakes made by my clients who brought a flooded iphone 6, iphone 5s, iphone 6s, iphone se, iphone 7, iphone 5, iphone x and wrote tips that will help everyone increase the chances of a successful recovery of your gadget.
I decided to split this post into two parts. The first is what to do if you don’t want to go to the service and echo the professional approach.
Of course, the first option is 50/50 - even if your phone starts working as before, this does not mean at all that after a while you will not notice that it is not working (speaker, sound, sensor)
Amateur part - what you can do yourself if the iPhone fell into the water
The latest models boast relative water resistance (can easily withstand 30 minutes in water at a depth of up to 1 meter).
In addition, the manufacturer claims full dust resistance, but this is only Apple's promise.
For example, an iPhone 7 being described as waterproof doesn't mean we can safely throw it in a pool and observe its watertightness.
There are already dozens of people who have learned about the lack of water resistance in it. In addition, the victim cannot claim compensation from Apple, which ... washes its hands, voiding the warranty in case of drowning.
Therefore, it is worth remembering a few rules that will allow you to save it.
iPhone dropped into water - disconnect all cables
When there is water in your iPhone, don't even think about charging it. Make sure that the cable is not connected to the smartphone and do not charge the phone until it is completely dry.
Any additional power flow can further destroy components located under the chassis.
iPhone dropped into water - gently wipe the liquid
Yes - nothing to look forward to, although I think before you do not have to deal with wiping liquid inside the iPhone.
This is the best cloth for cleaning glasses - it is durable, absorbs water and does not stick (unlike microfiber cloth, which can tear).
iPhone dropped in water, dry it
After you gently wipe off the liquid, place the phone with the charging port facing down so that the water can flow out.
You can dry it outside or in a dry and warm room for at least two days. At this time, do not try to start.
When the time is up, you can check if it works. If everything goes as planned, the water should evaporate and the phone should work flawlessly.
Unfortunately, this solution doesn't always work, so it's worth using another method. - use of rice
In this case, pour two cups of rice into an empty container and insert the phone there. This must be done in such a way that the smartphone is completely covered.
We leave it in rice for 24 hours, after which you can check the device. Do not try to turn on the phone before, as this may increase the risk of component damage.
The professional part - what not to do if your iPhone or iPad fell into the water
Whatever happens to your device after water gets into it (it doesn’t turn on, the speakers don’t work, it doesn’t charge, the screen doesn’t work), the first steps are always the same.
The greatest sin right after they get wet is to dry it and see if it can work.
This is often due to the fact that immediately after the device has become wet, it usually works without any serious symptoms for some time.
This is because the liquid itself does not cause the greatest harm, and the problem is the corrosion of electronic components, copper connections and metal elements.
Unfortunately, drying out a submerged device accelerates corrosion. Of course, depending on the fluid, corrosion can proceed faster or slower.
Faster, for example, when hit by sea water. Slower when it's just fresh water. The ideal would be distilled water.
After water intervention, a short circuit is created on your phone, and liquid and corrosion will not leave the inside of your iPhone on their own.
Attempting to connect a power source has a very negative effect on a flooded device.
Attempts to turn on flooded equipment cause the most damage - integrated circuits are burned, etc.
There are also people who, unaware of the problem, try to connect their phone to a computer using a USB cable.
They hope to recover data that is more valuable to some than the device itself.
Unfortunately, such situations happen among owners of Apple equipment very often, only this will not remove water and corrosion from the inside of the phone.
Conclusion - what not to do if the iphone fell into the water
Under no circumstances do we plug in a power source or USB cable or attempt to dry the phone with a hair dryer or heater.
The mild myth is the beneficial effect of rice on consumer electronics. Yes, rice has hygroscopic properties, but too small to remove all the water from inside the fairly sealed shell and soak it into the grains.
Even if we wanted to use some highly hygroscopic substance, we need to do it right after the flood.
Inserting a phone into rice in no way guarantees its full recovery and performance for a long time.
Some people believe in the power of rice and think that since the phone works after such a “treatment”, it can be safely used.
Others think that maybe the water didn't get in too hard because it works. Yes, I know people who have thrown their phone into a bucket full of water and pulled it out, wiped it on their pants, and use it to this day.
Unfortunately, I also know that the water did not flood the entire phone, but only into less important elements, such as the area around the antenna, speaker or headphone jack.
The phone itself seemed to work perfectly. Unfortunately, corrosion processes usually do not stop at items that the user does not use on a daily basis.
In addition, such a short circuit in one place is not only dangerous (I had a Siemens M55 repair that caught fire in my pocket after getting water in it), but also uses a lot of battery.
If the iPhone still works after water, despite the fact that it got into it, you can enjoy it, because the chances of saving it and restoring it to 100% are very high.
So - what to do when the iPhone falls into the water
The ideal situation is to remove the battery and take the device to qualified service as soon as possible.
Unfortunately, for Apple branded products, without the right tools and professional service and experience, this is not possible.
The iPhone not only requires a lot of work, tools and skills, but its battery is soldered to the motherboard and a soldering iron is required to remove it.
Will the iPhone be repaired under Apple's manufacturer's warranty? Under the terms of the manufacturer's limited warranty, after water intervention, the device will not be repaired or replaced with a new one.
There is also no chance that the manufacturer's service technician will not notice the moisture and the phone will be replaced with a new one.
Inside each phone, humidity sensors are installed, the so-called litmus sensors, which change color at a sufficiently high humidity level.
It is enough that only one of them will change color, which means that it works in improper, wet conditions, so that the device can be removed from warranty repair.
iPhone repair after water
Repairing an iPhone after a flood is not typical. It can be called a more complex repair process, which consists of many different actions aimed at restoring the device.
First, the degree of damage is determined. Sometimes water affects only part of the device, for example, the lower one, then all the upper elements are recognized as effective.
Elements that are in direct contact with the liquid and are subject to obvious corrosion are immediately removed and replaced with new ones.
The actual repair begins with work on the most important part of the iPhone, the motherboard.
It undergoes cleaning, first mechanically, where the motherboard is cleaned of all dirt with various types of brushes.
Then it is placed in an ultrasonic bath - a device resembling kitchen equipment, where ultrasounds of different frequencies wash out precipitation.
This cleaning can take up to several days, depending on the degree of fluid exposure and corrosion.
In the case when the level of contamination does not allow the device to solve the problem, the device is transferred to a centrifuge, where a more thorough cleaning of various deposits takes place.