This type of cable is not certified. This cable or accessory is not certified…. Causes of the "This accessory is probably not supported" error
Part of users iPhone or iPad at least once in your life, yes, you have encountered the appearance of an inscription on the screen of your gadget “This accessory is not certified to work with this iPhone”. At such moments, firstly, there is an understanding that your beloved iPhone will now run out of power and turn off. Secondly, the brain begins to think intensely that this could have happened to the cable.
Poor quality cable
The fact is that Lightning cables are quite expensive. A regular charger today costs 1,500 rubles on the official Apple website, and a version extended to two meters costs 2,300 rubles. Quite a lot of money, which becomes the reason for buying cheaper Chinese counterparts. Such cables are dangerous not only because they may not work correctly, but sometimes they can harm the device: wrong voltage, etc. It is worth buying only such accessories that have the mark “Made for iPhone/iPod/iPad” or other confirmation from Apple. However, the Chinese do not care about tricks, therefore the presence of such an inscription cannot guarantee 100% protection. Buy quality accessories from trusted companies.
Cable damaged
It could also be that your cable is damaged. Apple charging suffers from this (including for Mac), when near one of the ends of the wire the wire breaks from constant bends. Remembering the price of charging, we in every possible way postpone the moment of buying a new one, glue on the “wounded” copy of the electrical tape and carefully put it on the shelf in the evening. The author of the note had the same situation: the cable looked terrible and it was clear that he was living out his last days. However, everything turned out to be much worse.
IMPORTANT: To check if the problem is really with the cable, you can simply take another cable and put the device on charge.
Port problem
This is exactly the problem that I did not expect. For each of us, the iPhone/iPad is a kind of Universal Soldier that doesn't break. But it's not. I don’t know what happened on my iPhone 5, but the charging stopped working, the above message about “Missing certificate” appeared on the screen, and even charging a friend could not fix the situation. The service helped to figure out: the problem is in the port. The charging port is a weak point, as water and a lot of dust can get there. They fix the problem in a maximum of an hour, it is relatively inexpensive.
Apple has developed a clever security feature for iPhone devices that aims to prevent their owners from using unofficial accessories. This caution is explained by the fact that third-party devices can damage the smartphone. However, the error "This cable or accessory is not certified" can also occur among ardent fans of Apple products. What is the reason for this and how to fix the problem?
USB cable is damaged
If you are using the original cable and the message still appears on the screen, then there is a possibility that the accessory is damaged (small defects are not always noticeable). To finally verify its malfunction, you can connect the same (original) one. If the message disappears, then it's time to change the cable.
If there are any defects, the cable must be replaced.
Clogged connector
Over time, dust and dirt accumulate in the connectors. This causes a violation of the contacts of the cable with the device and, as a result, the error "This cable or accessory is not certified." This problem is especially relevant for Lightning inputs, since they do not have any protection.
After prolonged use, the USB port can become clogged, so it needs to be cleaned periodically.
Obviously, in such a situation, it is necessary to clean the device. To do this, you need a regular wooden toothpick. Gently draw it along the edges of the connector, without pressing hard, so as not to damage anything. After that, we try to connect the cable again.
For the procedure, you can also use a cotton swab moistened with alcohol (not water). The main thing is not to use metal objects for such purposes, which can scratch the connector and damage the contacts.
It should be remembered that the cleaning procedure is carried out with the device turned off.
Cleaning the iPhone connector - video
https://www.youtube.com/embed/2i6cysxp0aM
Using an Uncertified Cable
Many people prefer cheap Chinese cables, which are not only much more affordable, but also have a greater variety of models. However, Apple products skillfully recognize uncertified accessories and display a corresponding error on the screen, while prohibiting any actions: charging the device or transferring data. But there are always ways around this problem.
How to get around the "This accessory is probably not supported" error
Without turning off the device
Disconnecting a device
- Turn off the device completely.
- Connect one end of the cable to the connector, and the other to the network or computer.
- Turn on iPhone, iPad or iPod. It will start charging and you will be able to sync it with your PC.
If you pull out the cable, the message will appear again and again and you will have to repeat the previous steps.
What to do if the wire does not charge the iPhone
Hello! There is another problem on the current agenda. What to do (or not to do) when the iPhone does not charge? In this article, we will consider the possible prerequisites for this and try to find a solution for each of them. BYPASS PASSWORD IN iOS 10 or what to do if you forgot. So, if your iPhone has finished charging, sit back and read until the very end ... I'm sure one of the tips below will help you.
As you have already figured out, there are more than a few circumstances due to which the iPhone may not charge. Below I have collected the most common of them. Let's start with the most "harmless", and then move on to the "cardinal" ... Follow the order outlined, and every time try to put into practice what you read. I'm sure some of the tips for you will definitely help you charge your iPhone.
- Is it safe to charge iPhone with iPad charger? - read this article
- Is your iPhone draining abnormally fast? There is a solution! - read this article
Reason #0: Software glitch (firmware)
Believe it or not, almost always the reason for a non-charging iPhone lies in the software (firmware), and not in the hardware. If the iPhone is not to no longer Question The iPhone turned off and does not turn on what to do. If you didn't know, inside the iPhone there is a controller (a chip on the board) that is responsible for charging the battery. What to do if stuck Xiaomi Redmi 4 Pro and does not respond. This controller works under the guidance software. Thus, when you connect the cord to the iPhone, power is not supplied directly to the battery, but first to the board with the controller, which in turn obeys the program sewn into the phone.
What do we get? And the fact that the software component of the iPhone recognizes when a power source is connected to the phone and gives a command to the controller to start charging. In the case when the software is in a frozen state, no command will be given and your iPhone will not charge.
A hard reboot of the device usually helps to solve this problem. To do this, simultaneously press home buttons and Power for at least 30 seconds.
- If you need to restart your iPhone X or 8 - read this article
- More detailed information on restarting iPhone - can be found here
Reason #1: Lightning Port Pollution
80% of the population carries their phones in the pockets of their pants or trousers ... I don’t know about you, but I regularly clean out any garbage from my jeans pockets ... where does it come from? Moreover, this garbage (dust, lint, hair, etc.) strives to get into any crack in my iPhone.
Imagine! This is the first reason why the iPhone may not charge. You have no idea how much lint and dust gets into the Lightning charging connector! The accumulated compressed dust does not allow the Lightning plug to sit properly in the connector hole, which leads to the problem above. Don't believe me?
Similar articles
Try it! Take a wooden toothpick and carefully clean the accumulated debris from the Lightning connector. What to do if it does not charge, you need to try to charge the phone with another. In this article I will tell you what to do if the iPhone does not charge, but shows that it is charging, I will describe the causes of this problem. Try to “pick out” the charging holes from both corners. Be very careful not to damage the contacts. You will be shocked when you see how much "felt" you managed to get. After that, blow out the connector and connect the charging. What to do if iPhone won't charge. If the phone is heavily discharged, it may take up to 15 minutes before it shows the first signs of life.
Reason #2: Faulty USB port
If you are trying to charge your iPhone from USB port Well, the first thing to do is to check if it works. At my work Windows laptop have a couple USB connectors from which the iPhone does not charge at all. I do not know what it is connected with, but the phone does not receive a charge. It seems that 5V power supply for these USB ports not served at all.
Some information for general development:
- Regular USB
the port has an output voltage of 5V and a current of 0.5A
- Compared to standard iPhone charging gives out 5V and 1A
- Well and charger for iPad gives out 5V and 2A
Try it! If this is your case, try a different USB port, or plug your iPhone into a regular 220V charger. If the charger also fails to charge your iPhone, read on for the next possible cause.
Reason #3: Faulty charger/cable
iPhone cable won't charge. Repair
The most common fault usb cable for iPhone charging . ok… what if the original Apple charger doesn't charge the iPhone either? Then it was time to check the Lightning cable. I disassemble and repair in a few minutes
Similar articles
iPhone not charging? Charging problems? We will suggest a solution to the problem
In this video, we will tell you what can cause the Apple charging cable to work incorrectly. iPhone, iPod,.
OK, I won't be original when I say that. real charging device Apples are quite expensive. It's another matter if you buy a charger for iPhone on AliExpress (from China) - after all, it will cost you many times cheaper. BUT! BUT! BUT! I strongly do not recommend doing this! In no case DO NOT buy or use cheap Chinese non-original chargers. According to friends and personal experience, I can assure you that Chinese chargers will sooner or later play a cruel joke with your device if they don’t drive it into a “wooden box”. You must be aware that " cheaper doesn't mean better”, and when almost for nothing, doubts about the quality creep in.
So, if your iPhone is not charging from a Chinese (non-original) charger, I would DID NOT farther EXPERIMENT and would try GET A REAL ORIGINAL APPLE CHARGER. Everything should be clear here.
Okay, okay… what if the original Apple charger doesn't charge the iPhone either? Then it was time to check the Lightning cable. iPhone won't turn on, what should I do? What to do if Ipad, iphone does not turn on and is on. Again, from personal experience, even the original cables that come with the iPhone fail over time. To be honest, native cables are initially quite fragile. If they are not used carefully enough, then not only the outer plastic braid, but also the conductive “cores” are broken from frequent kinks. WHAT TO DO IF THE SENSOR DOES NOT WORK ON. I recently threw out my native cable, as it began to charge the iPhone up to no more than 60%.
I have nothing against the lightning cables they sell on AliExpress. They either charge or they don't. Do you know how much the original lightning cable 1m long costs? Apple Store? Fabulous 19. "modem mode" and what to do if it is not. Wow! For this money, you can buy at least three excellent certified cables that will charge your iPhone without any problems. I tried a bunch of cables - from cheap ones at 0.99 to expensive ones at 10 from different manufacturers, and I can advise you on a really cool lightning cable from Ugreen (link to AliExpress).
- How do I get up to 90% cashback for purchases on AliExpress - Instructions
"This cable or accessory is not certified..."
Probably, some of you have already come across the message “ This cable or accessory is not certified and cannot be guaranteed to work with this iPhone". There may be several reasons for this and we will consider them in a separate article. I can only say one thing - starting with iOS 7, Apple taught its devices to recognize the authenticity of USB cables. As I wrote earlier, a special chip is installed in the Lightning cable plug, which allows the iPhone (iPad) to recognize the origin of this cable. The Chinese, of course, learned how to fake Lightning chips, but with the release of iOS 7, Apple changed the rules of the game again. Therefore, try to use original chargers ...
Try it! Use known-good original chargers and Lightning cables. If they do not help, most likely one of the components of the iPhone is out of order. Read about it below.
Reason #4: iPhone Battery
Any battery is a consumable item… This means that batteries do not last forever and require periodic replacement. I recently replaced my battery Macbook Air, because the battery completely stopped holding a charge and it became impossible to use the computer without a cord.
The Lightning cable, which replaced the uncomfortable wires with wide connectors, has no drawbacks, it is better in everything, but this does not mean that you will never have problems with it ...
If the Lightning cable is not charging your iPhone or iPad, then there are only a few reasons for this, and two of them can be solved without buying another cable.
The reasons may be the following:
- The connector in the iPhone / iPad or on the cable is clogged;
- You are using a non-certified Lightning cable (this cable or accessory is not certified);
- The cable is broken.
The connector in the iPhone/iPad or on the cable is clogged
I personally encountered this problem, visually with additional lighting, the cable connector and port in the iPhone / iPad look clean. I was also confused by the fact that the device was still charging when the cable was bent. For me, the problem was obvious - the cable broke near the connector.In fact, it turned out that some contacts were simply clogged. You can take a match or a toothpick, wrap it with cotton wool and wipe it properly. Do not be afraid to gently scrape dirty areas without cotton wool. It is also desirable to clean the connector itself.
If after the iPhone procedures, the iPad began to charge properly or see the cable better, then this was your problem.
How to use a non-certified Lightning cable (not from Apple)
Starting with iOS 7, the cunning guys from Apple banned the use for charging and iPhone sync, iPad unofficial Lightning cable. When connected, you will see the following message:This cable or accessory is not certified and cannot be guaranteed to work with this iPhone/iPad.
But do not rush to run to the nearest store and buy expensive original wiring, this protection can sometimes be bypassed. True, for this you need to tinker a little, consider the example of charging an iPhone, iPad from a Chinese charger.
- We turn on the network from the USB / Plug side
- Connect Lightning cable to iPhone/iPad
- We see a pop-up window that we are scoundrels and use an uncertified cable, click "Close"
- We do not turn off the device, pull out the cable from it and connect it back to the iPhone, iPad
- Again, click "Close", we observe how the gadget starts to charge.
There is another way to bypass protection, sometimes in Cydia repositories comes across a jailbreak tweak Unauthorized Lightning Cable Enabler, which solves the problem for some. Due to poor performance, the tweak has no permanent residence.
Lightning cable broken
Everything is obvious here. If you are not a fan of waving a soldering iron, then we are calmly going to buy a new cable. The only thing that can be advised in this situation is to think about how to extend the life of the Lightning cable for the future.To do this, we need two springs from ordinary ballpoint pens, a little patience and accuracy.
The essence of this method is that the spring is metal and it simply does not allow the wire to bend so much, after which the wire deforms over time and fails. In addition to this, the spring shines and only decorates the wire, unlike electrical tape.
You can read more about this method in (author AlexST03).
If you did not find an answer to your question or something did not work out for you, and there is no suitable solution in the comment below, ask a question through our . It's fast, simple, convenient and doesn't require registration. You will find answers to your and other questions in the section.
Join us on
Comrades from the United States of America are fighting more and more zealously for copyright. In bourgeoisie, licensing is held in high esteem, as well as only original gadgets and devices. Therefore, the appearance of errors and warnings about certification of cables and accessories not news to iPhone owner, iPad or iPod.
The world-famous Apple company has gone further than others in this. Starting with the new, seventh generation of operating iOS systems, the ability to connect a smartphone or tablet with cheap, Chinese usb cables has disappeared. When connecting a non-original cord, a message appears that this cable or accessory is not certified and may not work properly with this device. At the same time, if on the beta versions of the system the gadget simply warned about the problem, now it blocks the objectionable cable.
There are three workarounds for the error if the message: “This cable or accessory is not certified” appears.
1) The simplest, but also unreliable. This method does not always work. But in order to try it, you do not need to make special efforts.
- Connect your phone to the network using a USB cable.
- Click "close" when an error message appears.
- Unlock the gadget and press the same button in the warning window.
- Disconnect the cable from the network, and then connect it back.
- Press the "close" button again in the message about the non-certified cable.
The gadget will start charging. This method is explained by a bug in the firmware of the device and is no longer always valid, and over time, Apple developers will be able to eliminate this trick.
2) Buy a special Chinese cable. What kind of talents the Celestial Empire is not rich with. And now, craftsmen from China have managed to develop a cable that is not afraid of blocking from the iPhone or iPad. The creators claim that the usb type is completely irrelevant for their models, the cords work equally well with all types of gadgets. How long the new generation of Chinese cables will be able to hold out on the market is unknown. After all, Apple also does not stand still and will want to improve programming code to protect against scammers.
3) The most difficult, but this moment the most efficient method. The Cydia store has released a special free tweak that will help bypass the protection.
- First you need to jailbreak using the Evasi0n 7 utility. Instructions for working with it can be found on the net.
- Next, you should start Cydia from the home screen and wait for the storage to be updated. In the Manage tab, click on the Source button.
- Add the following Internet address - http://parrotgeek.net/repo. The program will automatically download all the necessary data from the storage.
- Find a tweak called Unauthorized Lightning Cable Enabler.
- Update your device for the changes to take effect.
After these simple manipulations, the gadget will start charging even with the help of non-certified cables and accessories. This method is good because during the beta testing of the seventh generation of iOS, it was in the shadows. And only after the official release operating system, the tweak appeared in public access. Consequently, Apple was unable to block the actions of the program even before the release of the system. It is possible that they will now add such a function to new version firmware. But folk craftsmen will come up with something new. As always happens in the fight between pirates and copyright holders.