The computer reboots Windows 10. If you are in Safe Mode, you can. After reboot, blue screen and stop errors
If the Windows operating system unexpectedly restarts without warning or restarts when you need to shut down your computer, there could be several reasons for this. Windows OS can restart automatically and when certain problems occur. system errors. Updating the BIOS may also resolve this error. The information in this document will be helpful in troubleshooting problems where your computer restarts unexpectedly.
If your computer restarts unexpectedly and then won't boot into Windows, one of these documents may help you resolve the issue:
As you know, in addition to the troubleshooting steps that appear in unexpected computer restarts described in this article, you can update your video card drivers.
Windows OS restarts for no apparent reason
To resolve the issue, follow the instructions in this document in the order they are presented.
Step 1: Disable Automatic Reboot to view error messages
Many errors in the operation of hardware drivers or operating system display their text on the computer screen before stopping work or turning off the PC. However, if the function automatic reboot is enabled, an error message may not be displayed even if an error occurs. If this option is disabled, an error message will be displayed on the screen.
Follow these instructions to disable the automatic restart feature
Step 2: Check for hardware failures
Hardware problems can cause your computer to restart suddenly. For more information about testing for hardware problems, see Testing for Hardware Problems.
Note.The cause of failure is usually an increase in temperature inside the computer case. Over time, the cooling holes become clogged, which leads to an increase in the temperature inside the case. For more information, see Reduce the temperature inside your laptop for laptops or Prevent your computer from overheating for desktops:
Step 3: Update BIOS
Updating the BIOS can resolve problems where your computer suddenly shuts down. Follow the steps in the following sections to use HP Support Assistant, the HP website, or HP SoftPaq Download Manager to check for and download any BIOS updates.
Use HP Support Assistant to check for BIOS update
You can find the BIOS update using HP Support Assistant. If HP Support Assistant finds updated version BIOS, you can download and install it.
Download and install the latest BIOS from HP
In some cases, HP Technical Support may recommend downloading and installing a specific software package, or you may decide that you need to install a specific software package after reading another document. technical support HP. To manually find and load the BIOS itself new version, follow these steps.
After installing the updates, or if they are missing, proceed to the next step.
Using HP SoftPaq Download Manager (Business PCs only)
On professional computers, use HP SoftPaq Download Manager to support BIOS system computer is up to date. To find and manually download the most current version BIOS, follow the steps below.
Once the installation is complete, open the utility, then click Show this computer. A list of available updates is displayed.
Click Select SoftPaqs, then click All from the drop-down list.
In the section Downloaded SoftPaqs Click Download, then follow the onscreen instructions to download and install the updates.
Step 4: Perform a system restore
If the problem is new, you can resolve it by restoring your computer to a restore point before the problem started. Additional information For information about using System Restore, see Using Microsoft System Restore in Windows 10 and 8.
Step 5: Restore your computer
If you get no results after trying the other steps in this document, restore everything. software to the original state using a system restore. Depending on the version of Windows you are using, go to one of the following HP support documents for more information.
Have you bought a computer with Windows 10 and want to know how it reboots, besides the classic methods that almost all Windows users are familiar with from Windows 7 and XP? Today's article is devoted to solving this very issue. Why was information collected and systematized from many sites and forums, since Microsoft offers only a couple of methods for restarting a computer.
It would seem, why write an article on such a topic, because everyone has known everything for a long time. The fact is that most users use one or two methods of restarting the computer when it freezes or in order to clear the RAM from third-party services and applications, because after constantly switching the computer to hibernation mode, it begins to freeze, despite the abundance of free resources. Yes, and the shutdown menu in Windows 10 was called up using a different method, not similar to other operating systems. The information below is laid out to simplify everyday routine operations in just one click.
Via the Start menu
Microsoft cites this method as the first to restart a computer, so let's start with the classics.
- Click on the Start menu icon, which is located in the usual lower left corner.
- Then click on the inscription: “Shutdown” in the miniature list of functions that appears.
- Click on the inscription of the same name from the drop-down menu and wait until the PC shuts down.
Typically, restarting it takes about 20-25 seconds if there are no “heavy” applications in the list of automatically launched ones.
To help your Windows 10 PC shut down faster, it is recommended that you close the major third-party applications you use and save their work. First of all, this applies to various text, graphic and multimedia editors and office applications.
Via the WinX menu
The menu received this name due to the combination of keys through which it appears on the screen. It appeared in Windows 8 and is intended to replace some of the functions and system commands located in the start, the predecessors of which were even in the main Windows menu There never was 10.
See also: Where is Windows 10 stored?
The easiest way to reboot your computer is through WinX.
- Press and hold the specified combination of hardware keys for any keyboard layout.
- Select the drop-down item in the “Shut down...” menu that appears.
- Afterwards, a miniature list of shutdown commands will open, where we click on the one we need – “Reboot”.
- We are waiting for Windows 10 to complete all active services and applications and start.
Alt + F4 combination
Like earlier Microsoft operating systems, Windows 10 also supports calling the shutdown dialog using the “Alt + F4” hotkey combination.
What’s remarkable is that the combination only works properly on the desktop. In most other cases, the operation attached to a set of keys is responsible for sending a command to terminate the program or close the active window.
- Switch to the desktop. It is recommended not to minimize all programs, but to terminate them, as mentioned above.
- At the same time we press Alt keys and F4.
- Select “Restart” to restart the computer and press “OK” or “Enter.”
Charms panel
Compared to the "eight", in Windows 10 there is no Charms panels. But many users new tool I liked it, so enthusiasts have released several utilities that implement its functionality in latest Windows.
- Install a third-party application that returns Charms, for example, PopCharms.
- Move the cursor to the upper/lower right border of the screen.
- Click on the shutdown icon.
In different versions and applications, both the icon and the inscription may differ slightly.
Computer power button
Any Windows computer 10 can be turned off by pressing the power button if you set this action to perform the corresponding operation.
- We go into the power settings using any method (via the “Control Panel”, search bar).
- In the “Power button settings...” item, set “Reboot”.
- Click on the “Power” button.
Command line
All of the above methods to restart the computer come down to calling a single console command with a couple of arguments using GUI. Based on this, you can restart Windows 10 using a command entered into the address bar of the command line, command interpreter, or file manager with support for executing system commands.
- Let's launch command line or the Run window.
- Enter “shutdown /r /t 00”.
Here shutdown is the shutdown command, /r is an argument indicating to restart the computer, /t 00 is setting the time before the command is executed (instant start).
See also: Features of working in Windows 10
You can also restart your computer with Windows 10 classical method– using the “Reset” button located on the system unit. But it should be used only in cases of extreme necessity due to the high risk of causing harm. hard drive or sensitive elements motherboard.
(Visited 9,883 times, 30 visits today)
windowsprofi.ru
Turn off PC on Windows 10 without a mouse
woodhummer 1.04.2016 - 21:52 Workshop
Without a computer mouse, hardly anyone can imagine working. Even such a seemingly simple action as turning off the PC cannot be performed by many without a mouse. You may ask: why actually turn off the computer only from the keyboard? Just imagine - in wireless mouse The battery has run out... Let's look at this issue in more detail
4 easy ways to turn off your computer using the keyboard.
P.S.
We learned how to turn off a Windows 10 PC using only the keyboard, without using the mouse.
updated: 04/1/2016
leave a comment
wd-x.ru
How to use the keyboard to restart your computer
If the equipment fails due to a system failure, it can sometimes be very difficult to restart the computer (the mouse may not respond or touchpad touchpad on a laptop). There are several ways to restart your computer using the keyboard, which will be discussed further.
Reboot methods for Windows
Reboot the computer under operating control Windows systems possible in several ways:
- method two. If a system failure has paralyzed the computer almost completely (plus the hardware has failed), then you need to call the task manager using the combination “Ctrl+Alt+Del”.
In the top line you need to select “Shutdown” and then “Reboot”. This method is intended for users whose PC is under Windows control XP.
Standard reboot method
The standard method for rebooting a computer is to use the arrow keys.
In order to do this, you need to perform several sequential steps:
- the first thing you need to do is press the “Win” key (it is located between the Ctrl and Alt buttons);
- Next, you need to find the arrow keys on the keyboard (they are located at the bottom right side, between the standard and numeric keypads). You need to press the up arrow key “->” and then press the “Enter” key;
- then use the arrow buttons “” (Right) to activate the forced shutdown mode.
If applications were running, a dialog box will appear asking you to terminate running processes.
Video: Shutdown from the keyboard
"Ctrl" + "Alt" + "Del"
Another method that allows you to restart your computer using the keyboard involves using the “Ctrl+Alt+Del” command combination.
The system is restarted as follows:
Users Windows Vista and 7, when the dialog box appears, select “Shutdown Options...” (located in the lower right part of the dialog box) and select “Reboot” from the list provided.
"Alt" + "F4"
You can restart your computer using the combination “Alt+F4”.
To perform it in this way, you must perform the following steps sequentially:
- first you need to press the desired combination on the keyboard;
- then a small dialog box called "Complete" will appear on the screen. Windows operation" If during a failure the mouse does not respond to commands, then use the “Up” or “Down” arrows on the keyboard to select the required mode.
Win+C (for Windows 8/8.1)
For those users who have the Windows 8/8.1 operating system installed, you can restart the computer using the keyboard using the “Win + C” combination.
The procedure includes:
- type the desired combination “Win+C”;
- a sidebar will appear on the right side of the screen;
- on the sidebar you need to select the “Options” item;
- Then the “Options” panel will appear, on which you need to select the “Shutdown” icon at the bottom. If the mouse does not respond to commands, then switch to the “Shutdown” icon using the “Up” or “Down” arrows;
- after clicking on the “Shutdown” icon, a context menu will appear where you need to select the “Reboot” mode. As mentioned in the previous paragraph, if the mouse stops responding, then navigation is carried out using the arrow keys and the “Enter” key.
Command line
You can reboot not only using key combinations, but also through the command line. This option is suitable for owners of Windows XP/Vista/7/8 and 8.1 operating systems.
To restart the system via the command line, you need to perform a series of sequential actions:
- after the command line window appears on the screen, you must enter the following commands: “shutdown -t 0 -r –f” (“-r” - is responsible for restarting the system “-f” - the parameter is responsible for forcibly stopping all running processes, the “-t 0” command is responsible for an instant reboot without closing processes);
- then press the Enter key to confirm your selection.
The second restart option via the command line looks like this:
- First you need to open the command line window. The calling methods have been described above;
- then enter the following command “ping -n 0 127.0.0.1>nul&wmic OS WHERE Primary=”True” Call Win32Shutdown 6” and press the “Enter” key.
The third method is suitable exclusively for the Windows XP operating system:
- First you need to call the command line;
- then enter the command “rundll32 user.exe, ExitWindowsExec 2” and press “Enter”.
Seen: How quickly the PC turns off
How to restart your computer using the keyboard if it's frozen
You can restart your PC not only using the mouse, but also using the keyboard.
During operation, the PC may freeze, for example, due to a lack of memory, in which resource-intensive applications simply have enough RAM. Another reason for freezing may be a system failure, which occurs due to driver conflicts, registry errors, or improper functioning of applications.
Partially
If the computer is only partially frozen (that is, some equipment, such as a mouse, responds to commands), you can perform a restart using standard methods:
From the Start menu:
- in the lower left part of the screen you need to click on the “Start” menu icon or call it with the “Win” key;
- then select “Shut down” at the bottom and click on reboot in the drop-down list.
"Ctrl+Alt+Del":
- you need to type the desired combination on the keyboard;
- then a dialog box will appear in which you need to select “Shutdown Options” at the bottom right side and click “Restart” in the drop-down menu.
- first you need to type the combination “Alt+F4”;
- then the “Shut down Windows” window will appear;
- then you need to activate the “Reboot” mode.
Fully
In the event that the operation of the computer is completely paralyzed and the mouse does not obey, it is necessary to use more radical methods of restarting the frozen computer.
"Ctrl+Alt+Del":
The second method is to press the “Reset” key on the front side of the system unit. This method is the most radical of all existing ones, as it entails the complete loss of unsaved data. It will be relevant only if the computer is completely frozen and the equipment (keyboard and mouse) does not respond to commands.
This article looked at ways to restart your computer using the keyboard for each version of the Windows operating system. These methods will be useful in cases where the computer is frozen and the hardware has failed.
proremontpk.ru
Rebooting your computer or laptop
Good day.
You may need to restart your computer for a variety of reasons: for example, so that changes or settings in Windows (that you recently changed) can take effect; or after installing a new driver; also in cases when the computer starts to slow down or freeze (the first thing that even many experts recommend doing).
True, it is worth recognizing that modern versions of Windows need to reboot less and less often, not like, for example, Windows 98, where after every sneeze (literally) you had to reboot the machine...
In general, this post is more for novice users; in it I want to touch on several ways to turn off and restart your computer (even in cases where the standard method does not work).
1) The classic way to restart your PC
If the START menu opens and the mouse “runs” across the monitor, then why not try restarting the computer in the usual way? In general, there is probably nothing to comment on here: just open the START menu and select the shutdown section - then from the three proposed options, select the one you need (see Fig. 1).
Rice. 1. Windows 10 - shutdown/restart PC
If the mouse does not work (for example, the cursor does not move), then the computer (laptop) can be turned off or restarted using the keyboard. For example, you can press the Win button - the START menu should open, and in it select (using the arrows on the keyboard) the shutdown button. But sometimes the START menu does not open, what should you do in this case?
Press the ALT and F4 button combination (these are the buttons to close the window). If you are in any application, it will close. But if you are on your desktop, then a window should appear in front of you, as in Fig. 2. In it, using the arrows, you can select an action, for example: reboot, shutdown, exit, change user, etc., and perform it using the ENTER button.
You can also restart your computer using the command line (you just need to enter one command).
To launch the command prompt, press the combination of the WIN and R buttons (in Windows 7, the Run line is located in the START menu). Next, enter the CMD command and press ENTER (see Fig. 3).
Rice. 3. Launch the command line
At the command line, you just need to enter shutdown –r -t 0 and press ENTER (see Fig. 4). Attention! The computer will restart at the same second, all applications will be closed, and no saved data will be lost!
Rice. 4. shutdown –r -t 0 - immediate reboot
In general, it is best to resort to this method last. With it, it is possible to lose unsaved information after a reboot in this way - Windows will often check the disk for errors and so on.
Computer
On the case of the most common classic system unit, usually the Reset (or reboot) button is located next to the PC power button. On some system units, you need to use a pen or pencil to press it.
Rice. 5. Classic look of the system unit
By the way, if you don’t have a Reset button, you can try pressing it for 5-7 seconds. computer power button. In this case, usually it just turns off (why not reboot?).
You can also turn off the computer using the power on/off button next to network cable. Well, or just unplug the plug from the socket (the very last option and the most trouble-free of all...).
Rice. 6. System unit- rear view
On a laptop, most often, there are no special ones. buttons for reboot - all actions are carried out by the power button (although on some models there are “hidden” buttons that can be pressed with a pencil or pen. Usually, they are located either on the back of the laptop or under some kind of lid).
Therefore, if the laptop freezes and does not respond to anything, just hold down the power button for 5-10 seconds. After a few seconds, the laptop usually “squeaks” and turns off. Then you can turn it on as usual.
Rice. 7. Power button - Lenovo laptop
You can also turn off the laptop by unplugging it and removing the battery (it is usually held in place by a pair of latches, see Fig. 8).
Rice. 8. Battery removal latches
5) How to close a frozen application
A frozen application may prevent you from restarting your PC. If your computer (laptop) does not restart and you want to find out if there is such a frozen application, then you can easily find it in the task manager: just pay attention that “Not responding” will be written next to it (see Fig. 9 ).
Remark! To enter the task manager, hold down the Ctrl+Shift+Esc (or Ctrl+Alt+Del) buttons.
Rice. 9. Skype application is not responding.
Actually, to close it, just select it in the same task manager and click the “End task” button, then confirm your choice. By the way, all data in the application that you forcefully close will not be saved. Therefore, in some cases it makes sense to wait; the application may take 5-10 minutes. will hang and you will be able to continue working with mc (in this case, I recommend immediately saving all the data from it).
I also recommend an article on how to close an application if it freezes and does not close (the article also explains how you can close almost any process): http://pcpro100.info/kak-zakryit-zavisshuyu-progr /
6) How to restart your computer in safe mode
This may be necessary, for example, when you installed a driver and it didn’t work. And now, when you turn on and Windows boot- you see blue screen, or you don’t see anything at all :). In this case, you can boot into safe mode (and it loads only the most basic software that is needed to start your PC) and remove all unnecessary things!
In most cases, in order for the Windows boot menu to appear, you need to press the F8 key after turning on the computer (and it is better to press it 10 times in a row while the PC is loading). Next you should see a menu like in Fig. 10. Then all that remains is to select the desired mode and continue downloading.
Rice. 10. Option to boot Windows in safe mode.
If you can’t load (for example, you don’t see a similar menu), I recommend reading the following article:
http://pcpro100.info/bezopasnyiy-rezhim/ - article about how to enter safe mode[relevant for Windows XP, 7, 8, 10]
That's all for me. Good luck everyone!
pcpro100.info
Windows 10 secret reboot mode - Emergency reboot.
Windows 10 has a secret reboot mode called Emergency Reboot. When you perform an Emergency Reboot, Windows forces everything to close running applications, you won't see any warnings about saving your work. This restart method can be useful if you have some problems with applications or system freezes, and you would like to quickly restart your computer so that the system can work normally.
How to perform an emergency reboot in Windows 10.
To perform an emergency reboot Windows 10, you need to do the following.
Press Ctrl + Alt + Del on your keyboard. This will take you to the Security Options screen. From this screen, you can launch the Task Manager application, change the password or lock the computer, etc.
In the lower right corner of the screen you will see a power off button. Press and hold the CTRL key on your keyboard and then click on that power off button.
That's it. Windows 10 will warn you that it will perform a crash reboot. Click OK to confirm.
Remember that this works much the same as pressing the reset button on your PC, so save all your unsaved documents and applications before trying this feature. This works on Windows 8 too.
Read, how to download Safe Windows mode . Let's consider standard methods, using a recovery drive, or using a specific keyboard shortcut. If the operating system does not boot or does not work correctly due to one of many possible reasons, then sometimes the only way To restore its functionality and gain access to your data, you can boot the computer in Safe Mode and correct errors with its help.
Windows 10 Safe Mode
If you've been using Windows 10 for a while, you've probably noticed that the old ways of booting your computer into Safe Mode no longer work. Those. By pressing the F8 or Shift+F8 keys while the system is booting, you will no longer be able to boot the operating system in safe mode. But this does not mean that there are no more in Windows 10 Safe Mode. You just need to go through other procedures to download it. Let's look at them in more detail.
When you enter Windows 10 Safe Mode, the operating system loads a minimal interface and only the most necessary services and drivers that are necessary for the system to function.
Method 1: Using the System Configuration tool (msconfig.exe)
The easiest way to boot into Safe Mode Windows 10, this is using the . Many users know it by its executable name: msconfig.exe.
To run this tool, you need to open a window "Run"(Windows key combination + R) and enter msconfig.
Also, System configuration can be launched using the search box next to the menu button Start. Just enter .
In the tool window that opens, go to the tab Downloads, and in the section select Safe Mode.
After this, the system will prompt you to restart your computer for the changes to take effect. You can continue working on your computer without restarting, or you can restart it and it will automatically boot into Safe Mode.
Method 2: Restart your computer by pressing the Shift key (Shift + Restart)
Another way you can run Safe Mode Windows 10, this is to restart the computer while holding down Shift key. To do this, open the menu Start, press the button Shutdown and hold down the Shift key and select .
This combination can also be used from the lock screen.
/ Additional options.
In the window Additional parameters select
Windows 10 will notify the user that the system can be rebooted to launch additional options, one of which is Safe Mode. Click the button Reboot.
After the system reboots, select with which parameters you want to boot the system. To boot the system into Safe Mode There are three options (F4 – F6).
Method 3: Boot using a recovery disk
Windows 10 has a tool available to create recovery discs.
Boot into Windows 10 using the recovery disc created this way. After this, the system will prompt you to select a keyboard layout, then select the menu Troubleshooting / Additional options. Further actions are the same as those described in the previous section.
Method 4: Special boot options
Although there are several ways to boot Windows 10 into Safe Mode, this method will be the most correct - provided that the operating system that needs to be loaded into Safe Mode fully operational.
It's quite easy to do this:
- Open Options
- Go to Update and Security / Recovery
- In the section Special download options press the key Reboot now
- After this, Windows 10 will reboot and prompt you to select one of the menu items. Select Troubleshooting / Additional options.
- Next, follow the steps described in Method 2
Described methods for loading the operating system into Safe Mode relevant for both Windows 10 and Windows 8.1. Starting with these versions of Windows Safe Mode has ceased to be a function that only IT specialists use in their work. Now this is just another one of the functions of the operating system that is available to every user, and with the help of which the user can easily
Windows systems quite often behave very inappropriately, freezing at the most inopportune moment, after which it is necessary to restart the computer device. But the main problem of all users is that the mouse stops responding, and not everyone knows how to restart a frozen computer using the keyboard. That is why several basic techniques are offered for consideration that will fill gaps in knowledge. I just want to upset everyone Windows users 10. The fact is that this particular version can freeze so much that the keyboard stops responding. Here you will have to use a forced shutdown using a long press of the power button (there is no other solution).
How to Restart a Windows Computer Using the Keyboard: Common Method (Classic Method)
Most of those who have been working with Windows systems for a long time know about a universal way to bring a computer system back to life when an application freezes.
Of course, we are talking about the so-called three-finger combination (Ctrl + Alt + Del). It is suitable for all systems without exception. The only difference is the menus that appear on the screen after using the desired combination. In any case, to resolve the issue of how to restart the computer using the keyboard, this option works for all systems. Only from the presented points should you choose restart, not shutdown. In Windows 10, you will have to use the power button located in the lower right corner.
However, from the menu of the tenth version of the system, you can select to launch the “Task Manager”, from which you can also reboot, but more on that later.
How to Restart Your Computer Using the Keyboard: Using the Start Menu
No less in a simple way You can also call access to the standard Start menu. However, in this case, the question of how you can restart your computer using the keyboard is solved in a somewhat non-standard way.
Let's say that when the system freezes, the mouse becomes inoperable. What should I do? On modern keyboards, unlike outdated models, there is a special key marked Windows icon(hence its abbreviation - Win). It is this that replaces the virtual Start button and brings up the main menu.
By the way, even if such a key is missing, you can use at least effective way, which involves using the combination Ctrl + Esc, which can be an equivalent replacement.
After pressing, if the manipulator does not work, you must use the arrow buttons, go to the shutdown section and select reboot or shutdown.
Reboot in Windows 8
Now a few words about how to restart your computer using the keyboard in Windows 8, since this operating system is very specific, if only because of the absence of the same “Start” button and its menu.
In it you need to use the combination Win + C, after which a sidebar will appear on the right, in which you should go to the parameters and press the Enter button to expand the menu with action options. After this, use the arrows to select the required option and press the enter key again.
Universal method for all systems
You can restart your computer using the keyboard, regardless of what modification or build of Windows is installed, using one more in a universal way, which consists of using the combination Alt + F4.
Some may argue that such a combination is used to complete (close) active in at the moment programs. This is not entirely true. If you repeat it many times, active applications will close one after another sequentially. But when there are no more of them left, the command will be applied to the entire system. By the way, the same applies to those situations when programs are minimized in the “Taskbar”.
Program Execution Console
Finally, the problem of how to restart a computer using the keyboard can be solved by another method, which for some reason many users do not like. In this case, we mean using the Run menu.
You can call the console from the keyboard quite simply by using the Win + R combination to start (the “Run” menu will appear). Next, you need to set the shutdown /r command to execute (or with the parameters -t 0 -r -f to terminate all programs early) and press the enter key. By the way, a similar action can be performed in the “Task Manager”, first using the Alt and Enter keys to activate and call the file menu, then use the arrow to select the creation of a new task (the same “Run” menu will appear), enter the restart command in it and press "Enter".
With equal success, you can call the command line (cmd) and enter a similar command in it, or use the main command with other attributes, or again execute a variant of the selected command in the execution console.
What else can you use?
If we consider additional means for solving the problem of how to restart a computer using the keyboard, it is especially worth noting the fact that on some laptop models there are special buttons for restarting, placed on the keyboard, back or side panels(something like Restart).
Sometimes there may be specialized buttons for calling additional menus like ASSIGN on laptops of the series Sony VAIO. Also, at present, quite a lot of applications have been created for power management, which in their tools also contain tools for turning off or rebooting computer systems by using the keyboard.
A few final words
As you can already see, there are quite a lot of ways to reboot the system. It is difficult to advise which of all the proposed ones to use, since each user chooses the most convenient option for himself. But I think the described method works best for Windows 8. In other cases - optional. As already mentioned, if the keyboard refuses to work, you will have to use a forced shutdown, but you should only do such things in the most extreme cases, when other methods do not give the desired effect (in particular, this is a huge problem with the tenth modification of the system, which the developers, despite constantly released update packages, they never got around to fixing them).
A large number of clients of the latest operating system Microsoft Windows 10, it is often annoying to restart the system on your own. According to the creators' idea, Windows should automatically download all current updates, install them, correct previous developer errors, and, if necessary, automatically restart. This was done so that, from Microsoft’s point of view, there is no hope for “stupid users” and they cannot always correctly assess the importance of certain updates and patches.
But ordinary consumers have a different opinion - often such “impudent” behavior is not only annoying, but can also create some damage - not all files, documents, correspondence, and work can be restored after a forced restart.
In this article we will tell you how to reboot and how to disable automatic reboot Windows 10. There are several ways to fix this seemingly incorrigible feature in different ways. Which path to choose and how to fix it is up to the user to decide.
Setting the time to check for updates
This path does not completely disable the reboot, but allows you to configure when it should occur. This already gives some kind of convenience, and, at least, stops the “chaos” of the system on a personal computer, when the system constantly reboots at the most inopportune moment.
Open the “Updates and Security” section (via the “Start” tab or the Win+I combination)
We go to the “” section and see there the two menu subsections we need: “Change activity period” and “Restart options”.
In the first, we can select the time when updates are active, so this can happen both during our work, then we can control the start of the restart: save documents, etc., and vice versa, for example, only at night (then we should Always remember this and always save all necessary documents upon completion of work).
The configured time range (no more than 12 hours) shows when Windows will definitely not update. This opportunity settings are available only in Windows versions 10 1607 and above.
The second option will only be active when current updates have already been downloaded to the system. In this case, we can set the setting when Windows 10 can restart.
As we indicated above, these settings do not completely cancel rebooting in Windows 10, but may be enough to make the reboot more manageable and reschedule it at a more convenient time.
Local Group Policy Editor and Registry Editor
In cases where it is necessary to completely disable a forced reboot in Windows 10, a method using the editor will help group policy(in Pro and Enterprise versions) or in the registry editor (for the Home version).
Windows 10 (Pro or Enterprise versions)
To disable using gpedit.msc, follow these steps:
- Open the Local Group Policy Editor (Win+R, enter gpedit.msc).
- Computer Configuration -> Administrative Templates -> Windows components-> Windows Update- double click on the option “Do not automatically reboot when automatic installation updates if there are users in the system."
- Set the parameter to “Enabled” and save the settings.
That's it, now if there are logged-in users, the system will not reboot. If necessary, you can watch these steps on video:
Windows 10 (Home version)
Job Scheduler
Another way to disable unauthorized restart of Windows 10 to install updates is through the task scheduler.
- Launch the task scheduler (search in the taskbar or Win+R keys, and enter control scheduled tasks).
- Go to the folder Task Scheduler Library -> Microsoft -> Windows -> UpdateOrchestrator. Click right click mouse on the Reboot task in the task list and in context menu select “Disable”.
In the future, automatic unauthorized reboots to install updates will be stopped, the system will not shut down without permission, and updates will be installed upon reboot personal computer manually.
Today, these are the most common known methods of disabling self-restart when Windows updates 10. This should be enough to ensure that this behavior of the system no longer causes inconvenience. For clarity of the above instructions, we suggest watching the video: