Make a landscape page in Word. All methods: How to make a landscape page in Word
When working in text editor Word, portrait page orientation is not always suitable. Sometimes it is necessary for the pages to be like in an album, i.e. located horizontally. This is not at all difficult to do. Much harder to do landscape page in Word in the middle of the document. This is where you have to work hard.
Default O The page orientation in Word is portrait, but it can be changed to landscape if necessary. How to do this?
This may be necessary when creating reports from or for an album.
- Select a team – File – Page Options...
2. In the window that opens “ Page Options » select the tab « Fields" In the section " Orientation» click on « Landscape" and save by clicking the " OK ».
If you want your document to have only one or more sheets in the middle of the document in landscape orientation,
then place the cursor on the page that should be landscape and select from the menu – File – Page Options . In the window that opens " Page Options " on the " tab Fields" in the section " Orientation» install « Landscape" Below in the section " Sample" in the window " Apply" in the drop-down list, select " until the end of the document " and click the " OK ».
Next, place the cursor on the page from which the book format will again appear, and do the same. Just select " Orientation » — « TOlower " And in the section " Sample" in the window " Apply" set also "to the end of the document".
As you can see, nothing complicated.
The same can be done in a text editor Word 2007/2010. To do this, open the menu Page layout and to the right of the block name Page Options Click on the little black arrow. A window will open Page Options .
Do everything else in the same way as described above.
This is how you can make a landscape page in Word in the middle of a document .
If you have Word 2007 or 2010 installed, you can watch a video tutorial on changing the page orientation:
Quite often, when working with text in Microsoft program Word, there is a need to rotate the sheet horizontally. And how to rotate a sheet in Word? Let's figure it out.
IN Microsoft Word There are two types of sheet arrangement - vertical and horizontal. The vertical arrangement of the sheet is called a book spread, the horizontal one is called landscape.
The default page orientation in Word is portrait. However, when you are working with charts for example, or when you are creating something like a leaflet, you may need to rotate the sheet 90 degrees, i.e. switch to album sheet.
Luckily, Word makes it easy to switch to landscape mode.
If you are using Word 2003, then select the menu item File -> Page Options.
Then in the dialog box Page Options select tab Fields.
Under the heading Orientation click Landscape. A blue outline should appear inside the edge of the window with an image of a leaf in a horizontal position.
If you want all sheets in your document to be in landscape orientation, then simply click the OK button at the bottom of the dialog box. If you want to apply changes only from the current sheet and to all subsequent sheets, then select the option until the end of the document Apply in section Sample, and then click OK.
In addition, you can make any pages in the middle of the document landscape. Simply highlight the pages you need before opening the " Page Options" And then, following the instructions described above, select the option to selected text in the drop-down list called Apply.
Landscape sheet in Word 2007, 2010
In newer versions Word programs(2007, 2010) changing the orientation of the sheet is even easier. Go to the tab Page layout main menu, in the command group Page Options select Orientation -> Landscape. All pages of the document will change orientation.
If you need to rotate only one or several selected pages, click on the button in the lower right corner of the command group Page Options.
The orientation of pages in an MS Word document can be portrait or landscape. Most often, when formatting text, pages are in portrait orientation. But it also happens that a drawing, graph or inscription in large font does not fit on the page in width. In this case, you can make one or several landscape pages in Word. I will talk about this in this article.
How to make all pages in landscape orientation in Word
This is the simplest question. Open the document you want, then go to the tab "Page Layout". In the section "Page Options" Click on the “Orientation” button and select the appropriate item from the menu. After this, all pages of the document will become landscape orientation.
How to make landscape orientation for several pages in Word
Now imagine that you have several pages in a Word document for which you need to set the orientation to landscape. All other pages should remain in portrait orientation.
To do this, select all the text on the desired pages, go to the tab "Page Layout" and in the section "Page Options" click on the small arrow in the lower right corner.
A dialog box will open. In it, in the “Orientation” section, put “Landscape”. Then, in the Apply field, select "to selected text" and click "OK".
Selected pages became landscape orientation, while all others remained portrait.
There is another way to make several landscape pages in MS Word. To do this, put italics at the beginning of the text, on the page from which the landscape ones begin, go to the tab "Page Layout", click on the “Breaks” button and select from the drop-down list "Next page".
Now place italics at the beginning of the page where the portrait pages begin again, and repeat all the steps. When non-printing characters are enabled, the following message will be displayed: "Section break (from next page)".
Put italics on one of the pages that will be landscape, go to the tab "Page Layout" and in the section "Page Options" click on the arrow. In the next window, select landscape orientation, and in the "Apply" field select "to current section". Click OK.
All pages that were in the current section became landscape orientation.
How to make one landscape sheet in Word
If you need to make one landscape page in Word, then you can use the methods described in the previous paragraph. Only apply them to one page.
Now you can easily create book or landscape pages in your document. Moreover, you can change the orientation for both several and one page.
Rate this article:Working with sheets in the Microsoft Word text editor is one of the easiest things to do. They can be created, deleted, resized, flipped, etc. In general, you can do whatever your heart desires (or almost everything) with sheets of documents.
Today we will discuss such an operation as turning over a sheet. Speaking in more professional terminology, it means changing the orientation of the sheets. This can be done with a few clicks, but some users may have problems with this too. Therefore, I have prepared special instructions that will help you in the future make your own landscape sheet in Word.
So let's look at a few simple ways implementation of this operation.
How to make a landscape sheet in Word 2007?
Method 1
Let's assume that we have a document that has one page. Your task is to turn it 90 degrees. To do this you need:
At the top of the window we find the tab “ Page layout" and click on it.
After this, all the pages in your document will be rotated 90 degrees, and will look like pages from a sketchbook.
Method 2
To implement it, you again need to go to the “ Page layout" Next, you must open the “Page Settings” dialog box; you can do this by clicking on a special button, the location of which is shown in the screenshot below:
After you do this, in the dialog box that opens, in the “ Field"(installed by default) we find two icons with captions " Book" And " Landscape" In accordance with our goal, select the last icon by clicking on it with the left mouse button. Then click on the button “ OK».
How to make a single sheet in Word landscape?
Before that, we looked at ways to change the orientation of all sheets in a document. Now let me tell you how to make 1 sheet in Word 2007 separate, and leave the rest unchanged.
So, to commit this operation we need to select all the contents on the sheet that requires flipping. If there is no text or pictures, then it is enough to highlight spaces, enters and other indents (they are always on the sheets).
Did you do it? Then we execute the command “ Page layout» — « Page Options"(see photo above for how to do this).
Now, in the dialog box that opens, select the orientation “ Landscape" Further in the section “ Apply:"from the drop-down list select " To selected text».
Then all you have to do is press the “ OK" and the dialog box will close on its own. And you will get one of the pages in the document with landscape orientation. In the same way, you can repeat the above instructions and turn any other page that is necessary.
Many of you have long been accustomed to working in Word. In addition, most are quite satisfied standard settings document. But if you have to use a computer at work, I'm sure that sooner or later you will need to set a document or some separate sheet to landscape orientation. This article will discuss exactly how to make a landscape sheet in Word. By the way, one of the simplest tasks.
Standard Sheet Sizes
Before making landscape or book sheets, I would like to tell you a little about standard sizes. It just so happens that a standard A4 sheet has a size of 297 by 210 millimeters. This sheet format is called book format. But if you take and turn the sheet 90 degrees, you will get a sheet with parameters of 210 by 297 millimeters. This sheet will have the same A4 format, but in landscape orientation. And if you already know, then A4 is not the only standard size.
Size chart of standard formats
Format | Landscape size(mm) | Book size(mm) |
A0 | 841x1189 | 1189x841 |
A1 | 594x841 | 841x594 |
A2 | 420x594 | 594x420 |
A3 | 297x420 | 420x297 |
A4 | 210x297 | 297x210 |
A5 | 148x210 | 210x148 |
A6 | 105x148 | 148x105 |
Create a landscape sheet
If there is a need to make a landscape sheet, then there is no need to strain - it is done simply. For these purposes, it is best to use the “Page Layout” panel. It contains a group of elements called “Page Settings”. It is in the page parameters that you can change the sheet orientation from portrait to landscape and vice versa.
Please note that if you perform the suggested manipulations, the orientation of the sheets will change throughout the document.
But you don't always need to change the orientation of the entire document. Personally, I have come across a large number of documents in which most of the sheets are made in portrait orientation. But there are sheets with landscape orientation. So, I want to draw your attention to the small square with a down arrow, located in the page options section.
By clicking on the indicated square, you can get to dialog box"Page Options".
View of the Page Setup window
As you can see, in the image of the Page Setup dialog box, the arrow indicates how the setting will be applied. There may be several such methods:
- To the entire document;
- Until the end of the document.
By manipulating the “Apply” parameter, you can easily achieve the desired result. And in the future, don’t think about how to make a landscape sheet in Word. You will just take it and do it.
By the way, you may have a question about how to make a landscape sheet in the middle Word document. If you haven't guessed yet, I'll give you a hint:
- We stand on the desired sheet;
- We make landscape sheets until the end of the document;
- We stand on the next one after the desired sheet;
- We make everything bookish until the end of the document.