Firmware for Samsung Xpress M2070 MFP. Firmware Xpress M2070 Samsung m2070 original firmware
Fix firmware Samsung Xpress SL-M2070
Price - 210 UAH. \ 500 rub. \ 7.9 USD
Model |
Firmware version |
Price |
v3.00.01.06 v3.00.01.37 |
210 UAH \ 500 rub. \ 7.9 USD |
To order FIX firmware M2070, please specify the necessary information:
MFP model (see sticker on the back panel)
MFP firmware version (see in the System Firmware Version report line)
CRUM number of the cartridge chip (see in the report line Serial No: CRUM-)
Printer serial number (see in the Machine Serial Number report line)
Print report Samsung Xpress M2070
To print the Configuration Report Xpress M2070: Press [Menu] find: ( System Setup ) / ( System Setup ) press - buttons - find: ( Report ) / ( Report ) press and select: ( Configuration ) / ( Configuration ) and click . A configuration report will be printed showing the firmware version and serial number printer.
If the MFP is already locked and does not want to print a report, printing is possible from the service menu. To enter the service menu (TECH MENU), press very quickly: . Find the section (Report), select the item (Configuration) and click.
Sample Configuration Report Xpress M2070
To print a Supplies Information Xpress M2070 report: Press [Menu] find: (System Setup) / (System Setup) press - buttons - find: (Report) / (Report) press and select: ( Consumables) / ( Supplies Info ) and press . A configuration report will be printed containing the CRUM number, as well as the serial number of the printer.
If the MFP is already locked and refuses to print reports, and also if when printing report instead of CRUM number writes "PLEASE REPLACE "then you need to log in service menu (TECH MENU), to do this, press very quickly: . Find the section (Report), select the item (Supplies Info) and click.
Sample report Supplies Information Samsung Xpress M2070
Samsung firmware instructions Xpress M2070
The letter with the firmware comes with an archive containing three files (Two firmware files.hd and a file that launches the firmware usbprns2.exe)
1.
Connect the printer to the computer and wait for it to become ready
2.
Unpack the archive with the firmware
3.
Enter the printer into forced firmware download mode. For this purpose nWith the printer turned off, press and hold the button. Turn on the printer with the button, then release the button. The display will show (Press Stop), press the button quickly. Upon successful entry into forced mode, a message will appear (Wait Image)
4.
Move the first firmware file with your mouse 1_M2070_V3.00.01.20.hd on usbprns2.exe
A black window with running dots will appear and close after a few seconds. After this, the device will begin to flash
Before proceeding directly to the firmware, we will need information about the software version that was installed by the manufacturer and the CRUM number of your cartridge chip.
Printing reports on an unlocked MFP
Let's figure out how to print such a report when your The MFP has not yet been blocked.
To do this we go to [ MENU] > [System Settings] > [Reports] > [Configuration] > [Seal] > [YES]
In the received report, look for the line System Firmware Version - this is the version of the software installed on your device. In the example, the line we need is highlighted in yellow!
To print a report on consumables - zlet's go to [ MENU] > [System Settings] > [Reports] > [Consumables] >[Seal] > [YES]
In the received report, look for the line Toner information > Serial No > CRUM - In the example, the line we need is highlighted in yellow!
Printing reports on a locked MFP
Printing reports is possible from the service menu; to do this, press the following key combination on the control panel of your MFP -
[ Menu ] [ Back ] [ Left ] [ Right ] [ OK ] [ Stop ] [ Menu ]
We receive a report with a number CRUM our chip
We receive a report with the software version of your device.
The resulting reports will look similar to those received when your MFP has not yet been blocked.
Now, having printed out all the reports necessary for the firmware, let's perform the flashing itself, for this:
1. C download the firmware file or create it using a special firmware generator.
2. Connect your MFP via USB cable to your computer.
3. Install the driver for your device (you don’t have to install it, just cancel the installation process, it is important that the computer “sees” your MFP)
4. The first stage drag the file from the archive with the firmware First to bootloader usbprns2, the update process will start (the display on the printer will change)
The process of flashing the Samsung Xpress M2070 MFP has begun!
5. Wait for the automatic reboot.
6.Second stage, you need to enter your MFP into forced mode, to do this you need to turn it on with the Stop/Reset button held down, if you successfully enter the forced mode, the display will show - Waitimage
7. Now drag the file from FIX firmware for bootloader usbprns2
8. Wait for the automatic reboot.
If the MFP itself rebooted and became ready, congratulations to you!
You managed to reflash your MFP yourself, all that remains is to seal the chip on the cartridge and you no longer have to worry that your faithful friend will one day be blocked and stop working, and it’s also important to forget about the expensive replacement of chips!
Black and white laser Xpress MFP M2070 went on sale in 2013. The MLT-D111S cartridge is used (the declared resource is only 1000 pages), the cost of which is from 2600 to 2900 rubles. The cartridge included in the kit (starter) is, as usual, only half full; in reality, after 300-400 printed pages, the “Replace cartridge” error appears. To clear this error and continue printing you need to reflash the M2070.
Order firmware
To order fixed firmware for Xpress M2070, M2074, M2078 (as well as modifications F, W, FW), you will need to provide one of the operators with the information below.
Exact device model
Indicated on the front panel of the MFP above the display. M2070, M2070W, M2070F, M2070FW have different firmware!
Current firmware version
- Select “Menu”->”System Settings”->”Report”->”Configuration”.
- A configuration report will print; in it, find the Firmware Version line.
CRUM number of the cartridge chip
- Turn on the product and load a stack of paper.
- Select “Menu”->”System Settings”->”Report”->”Consumables Information”.
- A report on consumables will be printed, in it find the CRUM number of the chip (11-digit, there may be letters, do not mix it up!).
Sample reports, as well as alternative way You can find printable reports here.
Table with the current firmware status:
MFP model | Firmware versions | Price |
---|---|---|
SL-M2070 SL-M2070W SL-M2074(W) | 3.00.01.08 3.00.01.15 3.00.01.16 3.00.01.17 3.00.01.20 3.00.01.22 3.00.01.23 3.00.01.24 3.00.01.25 3.00.01.26 3.00.01.29 3.00.01.30 3.00.01.33 3.00.01.37 | 600 rub. |
SL-M2070F SL-M2070FW SL-M2074 (F, FW) | 3.00.01.08 3.00.01.15 3.00.01.16 3.00.01.17 3.00.01.20 3.00.01.22 3.00.01.24 3.00.01.25 3.00.01.26 3.00.01.27 3.00.01.33 3.00.01.37 |
M2070 firmware instructions
- After paying for the fixed firmware, you will be sent a link to the archive. Download it (~15 MB) and unzip it to any folder. Make sure the MFP is turned on and has a stable connection.
- First you need to flash it with a file whose name contains the word First. To do this, in normal mode, drag the file onto the usbprns2.exe loader with the mouse. A black window will appear with the word Downloading and dots, or it may appear and immediately disappear, this is normal.
- The MFP display will indicate the firmware download process. Wait until 100%, then the M2070 should automatically reboot (the display will show "Initializing" and you will hear the motor running).
- After rebooting, turn off the MFP and turn it on in forced mode, to do this:
- Hold down the "Stop" button and, while holding it, press the power button.
- When “Download Mode Press Stop Key” appears on the display, quickly release the “Stop” button and press once again.
- "Wait Image" will appear on the screen.
- When the display says "Wait Image" - drag the file whose name begins with FIX (Second) to usbprns2.exe and wait for the automatic reboot.
- After the next reboot, remove the cartridge and cover the chip (there are four yellow contacts on the right side) with regular tape. Install the cartridge and test printing documents from your computer. If it prints and the “Status” indicator is green, congratulations, the firmware process has been completed successfully!
HOW TO FLASH Samsung Xpress M2070 Video and INSTRUCTIONS Samsung Xpress M2070, Xpress M2070F DOWNLOAD FIRSTWARE FOR FREE
TELTEL 071 326 54 50 FIRMWARE AND PRINTER REPAIR DONETSK
Some information from the forums on Samsung Xpress M2070 M2020 firmware
In general, I came across another guano from the Samsung company. The cartridge looks like D101 and fits like the original one, but D111S. The chip is new, with the chip from d101 the red eye does not light up at startup.
HOW TO FLASH Samsung Xpress M2070
Videos and Samsung INSTRUCTIONS Xpress M2070, Xpress M2070F DOWNLOAD FIRMWARE FOR FREE
Firmware dataSAMSUNG 2070 > V3.00.01.20F > mach 072JB8KFCF00MCK > crum 14042577356DOWNLOAD BELOWFIRSTWARE FOR Xpress M2070 TO DOWNLOAD FOR FREE GO
Firmware dataSAMSUNG 2070F > V3.00.01.20F > mach 072JB8KFCF00MCK > crum 14042577356DOWNLOAD BELOWFor firmware you need:
Disconnect all devices except the printer being flashed.
Connect the printer to be flashed to the computer and turn it on with the power button
Run download1
Wait for the firmware to flash and reboot the device
Turn off the printer and start it in forced mode, to do this, press Stop while the printer is turned off, without releasing it, turn on the printer with the power button, then release the power button and Stop, the printer will write to press Stop again, press. The printer will write Waite image
Run download2 refueling station in Donetsk with pick-up service 071 326 54 50
The printer is flashing, waiting for a reboot
Seal the cartridge chip or remove it from the cartridge
The firmware is finished!
BONUS TO THE ARTICLE
VIDEO INSTRUCTIONS Firmware Samsung printer Xpress M2070 firmware cloning method
TEL 071 326 54 50 FIRMWARE AND REPAIR
A LITTLE INFORMATION FROM FORUMS ON THIS TOPIC
Chudnov says:
02/25/2017 at 19:10
This device cannot be cloned
Answer
Sergey says:
06.26.2017 at 15:31
Fixed firmware version http://fix-print.net/
Answer
Denis says:
10/05/2017 at 08:41
Good afternoon. My printer has firmware version 29, is it possible to flash it with version 30?
Answer
Pavel Chudnov says:
10/05/2017 at 10:03
Hello, it is possible, but only if the firmware is made specifically for your device
Answer
Anonymous says:
10/30/2017 at 09:14
chipov.net writes “Page not found." Is the office still open?
Answer
Pavel Chudnov says:
10/31/2017 at 03:15
Hello, the site is working properly, try again
Answer
barbarella (@bancl) says:
10/31/2017 at 23:35
I understood what was going on: in the Arch Linux + Firefox configuration, the site does not work, it says “Page not found”. Arch Linux + Chrome works, Windows + Firefox works too.
Answer
Anonymous says:
11/23/2017 at 10:42 am
Hello. What happens if the cartridge has already been refilled, but the printer has not yet been flashed? Write that the toner should not be at zero
Answer
Pavel Chudnov says:
11/23/2017 at 11:55
Hello, you can safely print until the device is completely locked, just print out a report in advance with the firmware version and CRUM number to make it easier to order the firmware
Answer
Alexander says:
02/26/2018 at 16:15
Hello.
How can I roll back from fixed firmware to native firmware?