What to do if your headphones wheeze, squeak, or make noise. Extraneous sound and noise in headphones and speakers: where does it come from and how to eliminate it Why does the sound wheeze in headphones
Work and entertainment on a computer cannot be considered complete if there is no sound on it. It is necessary to watch movies, listen to music, receive notifications of new messages, and so on. You can name hundreds of programs, sites, games and applications that lose their relevance without sound.
The sound needs to be clear and loud, and distortion is a big problem that anyone can face. Windows user 10. If the sound on the computer begins to crackle, wheeze, sound muffled, hiss, or there are other problems with it, you need to fix the problem as soon as possible. In this article, we will look at the main reasons why similar problems with sound in Windows 10, as well as ways to fix them.
Important: Before you try to fix a software problem, make sure that the problem is not hardware. If the sound hisses from speakers connected to a computer or laptop, try checking them by connecting speaker system to the player or phone. In a situation where the laptop's built-in speakers wheeze, on the contrary, connect an external speaker system to the laptop and see how it sounds. You can also try disconnecting the laptop or computer connector from the sound card and connecting it again.
The sound on the computer wheezes due to effects
The most common problem that most often results in sound distortion is the effects being turned on. In the Windows operating system, you can apply various effects to the output sound, which many users forget about, and they think that there are problems with the audio.
Sound effects on your computer may turn on due to changes in system settings by various applications that have administrator rights. You can check whether wheezing, hissing, or muffled sound is due to Windows effects in the audio settings. This is done as follows:
After saving your changes, make sure that the sound on your computer has returned to normal and is “clean.” If it continues to crack, wheeze, hiss, or have other defects, proceed to the next step in the instructions.
Sound hisses and crackles in exclusive mode
Some versions of Windows 10 may conflict with sound card drivers, causing the user to experience defects when listening to audio in exclusive mode. Also, problems with exclusive sound mode may occur on weak computer. To exclude the possibility of crackling, hissing and wheezing when playing sound due to the exclusive mode, we recommend trying to disable it.
To prevent applications from using monopoly mode sound, press again in the notification area right click mouse on the speaker icon and select "Playback Devices". Go to the properties of the device you are using and on the “Advanced” tab, uncheck both items located in the “Exclusive Mode” section.
Check if the sound improves after turning off exclusive mode.
Sound problems due to incorrect drivers
The Windows 10 operating system automatically installs the optimal (according to its version) drivers when the system first starts. However, in some cases, problems may arise with such drivers. To exclude this, it is recommended to download and install it on your computer latest version drivers for the sound card from the official website of its developers.
Please note: If the problem with hissing, wheezing and other sound defects occurs on your laptop, you can also try reinstalling the audio drivers from the official website of the laptop manufacturer.
Important: If Device Manager does not indicate that there are problems with the sound card drivers, this does not mean anything at all. Even in this case, it is recommended to try updating the drivers, since the system may not see the presence of defects in the sound, assuming that if the sound is output, then there are no problems with it, but in reality this may be different.
Quiet sound in Windows 10 due to communication settings
Another innovation of modern Windows versions– this automatically mutes the sound output various programs, when making a call, for example, in Skype. There may be situations when this option does not work correctly and, due to some errors, constantly keeps the sound muted, considering that the computer is in call mode.
To exclude the possibility of problems with quiet sound because of this Windows features, you can try turning it off and check if the problem persists. Disable the option in the sound settings:
Note that this method helps solve the problem only if the sound is quiet, but in a situation where it wheezes or crackles, the problem cannot be eliminated.
Sound problems in Windows 10 due to incorrect playback format
Modern sound card models support almost any audio playback format that can be offered by the Windows operating system. However, if you have an old card installed in your computer, this may cause problems.
To go to the playback format settings, you need to go to the “Control Panel” and select among available options"Sound". Next, click on playback device properties. A window will open where you need to go to the “Advanced” tab. Set the “Default Format” option to “16 bit, 44100 Hz (CD)” and save your changes.
It is worth noting that the 16-bit format at 44100 Hz is supported by almost all sound cards, and it is still used over time earlier versions Windows.
If none of the above tips helped fix the situation with wheezing, crackling and hissing sound, we recommend that you try checking your computer for viruses. It often turns out that the computer is infected with a Trojan or Malware virus, due to which the operating system freezes, which is accompanied by a temporary loss, wheezing or crackling sound.
Good day.
Most home computers (and laptops) come with speakers or headphones (sometimes both) connected. Quite often, in addition to the main sound, the speakers begin to play all sorts of extraneous sounds: the noise of mouse scrolling (very common problem), various crackling sounds, trembling, and sometimes a slight whistle.
In general, this question is quite multifaceted - there can be dozens of reasons for the appearance of extraneous noise... In this article I want to point out only the most common reasons why extraneous sounds appear in headphones (and speakers).
Reason #1 - problem with the connection cable
One of the most common reasons for the appearance of extraneous noise and sounds is poor contact between the computer's sound card and the sound source (speakers, headphones, etc.). Most often, this happens due to:
- damaged (broken) cable that connects the speakers to the computer (see Fig. 1). By the way, in this case you can also often observe the following problem: there is sound in one speaker (or headphone), but not in the other. It is also worth noting that a broken cable is not always visible to the eye; sometimes you need to install headphones to another device and test it to get to the bottom of the truth;
- poor contact between socket network card PC and headphone plug. By the way, very often it helps to simply remove and insert the plug from the socket or turn it clockwise (counterclockwise) to a certain angle;
- loose cable. When it starts to wobble due to drafts, pets, etc., extraneous sounds begin to appear. In this case, the wire can be attached to the table (for example) with regular tape.
By the way, I also observed the following picture: if the cable for connecting the speakers is too long, extraneous noise may appear (usually subtle, but still annoying). When the length of the wire was reduced, the noise disappeared. If your speakers are very close to your PC, it might be worth trying to change the length of the cord (especially if you use some extension cords...).
In any case, before you start looking for problems, make sure that everything is in order with the hardware (speakers, cable, plug, etc.). To check them, just use another PC (laptop, TV, etc.).
Reason #2 - driver problem
Anything can happen due to driver problems! Most often, if the drivers are not installed, you will have no sound at all. But sometimes, when the wrong drivers were installed, the device (sound card) may not work correctly and therefore various noises appear.
Problems of this nature also often appear after reinstallation or Windows updates. By the way, Windows itself very often reports that there are problems with drivers...
To check if everything is ok with the drivers, you need to open device Manager (Control Panel\Hardware and Sound\Device Manager- see fig. 2).
In Device Manager you need to open the " Audio inputs and outputs"(see Fig. 3). If yellow and red exclamation marks are not displayed in this tab opposite devices, it means that there are conflicts and serious problems not observed with drivers.
Reason #3 - sound settings
Quite often, one or two ticks in the sound settings can completely change the clarity and quality of the sound. Quite often, noise in the sound can be observed due to the inclusion of PC Beer and the line input (and other things, depending on the configuration of your PC).
To configure the sound, go to Control Panel\Hardware and Sound and open the tab " Volume settings"(as in Fig. 4).
In the “Levels” tab there should be the treasured “PC Beer”, “CD”, “Line input”, etc. (see Fig. 6). Reduce the signal level (volume) of these devices to a minimum, then save the settings and check the sound quality. Sometimes after these settings are entered, the sound changes dramatically!
Rice. 6. Properties (Speakers/Headphones)
Reason #4: Speaker volume and quality
Often, hissing and crackling in speakers and headphones appears when their volume reaches maximum (on some, noise appears when the volume rises above 50%).
This happens especially often with inexpensive speaker models; many people call this effect “jitter.” Please note: this may be the reason - The volume on the speakers is turned up almost to maximum, and in Windows itself is turned down to minimum. In this case, simply adjust the volume.
In general, it is almost impossible to get rid of the “jitter” effect at high volumes (of course, without replacing the speakers with more powerful ones)…
Reason #5: Power supply
Sometimes the reason why noise appears in headphones is power supply diagram(this recommendation is for laptop users)!
The fact is that if the power supply circuit is set to power saving (or balance) mode, it is possible sound card There is simply not enough power - because of this, extraneous noise is observed.
The solution is simple: go to Control Panel\System and Security\Power Options- and select the mode “ High performance"(this mode is usually hidden in the additional tab, see Fig. 7). After this, you also need to connect the laptop to the power supply, and then check the sound.
Reason #6: Grounding
The point here is that the computer case (and often the speakers too) passes electrical signals through itself. For this reason, various extraneous sounds may appear in the speakers.
To exclude this problem- one simple trick often helps: connect the computer case and the battery with a regular cable (cord). Fortunately, there is a heating radiator in almost every room where a computer is located. If the reason was grounding, this method in most cases eliminates interference.
Mouse noise when scrolling the page
Among the types of noise, the prevailing extraneous sound is the sound of a mouse when it scrolls. Sometimes it is so annoying that many users have to work without sound at all (until the problem is fixed)…
Such noise can occur for various reasons; it is not always easy to establish. But there are a number of solutions to try:
- replacing the mouse with a new one;
- replacing a USB mouse with a PS/2 mouse (by the way, many PS/2 mice have a mouse connected via an adapter to USB - just remove the adapter and connect directly to the PS/2 connector. Often the problem disappears in this case);
- replacing a wired mouse with a wireless one (and vice versa);
- try connecting the mouse to another USB port;
- installing an external sound card.
Rice. 8. PS/2 and USB
PS
In addition to all of the above, speakers may begin to produce noise in the following cases:
- before a mobile phone rings (especially if it is close to them);
- if the speakers are too close to the printer, monitor, or other equipment.
That's all I have on this issue. I would be grateful for constructive additions. Good job 🙂
Headphones are very simple devices, and, as a rule, they are reliably protected from various sound distortions. But, like any other acoustic devices, under the influence of various factors they can wheeze, creak, or make noise - the sound can deteriorate in different ways, but the essence is always the same. This can both spoil the impressions of the sound of the headphones and make listening to music with them completely impossible. What should you do if the sound in your headphones is distorted in one way or another?
Why can headphones produce noise?
The hum in speakers, be it headphones or the emitters of any other acoustic device, is usually caused by physical impact on the device. In the case of speakers, hum can be caused, for example, by an amplifier if it is connected incorrectly, or even by neighboring speakers.
Very often, the speakers begin to hum if a call comes in on the phone lying next to them. Everyone knows this unpleasant high-pitched squeaking and buzzing - if this is the reason in your case, just move the phone away from the headphones and the background will disappear.
In addition to interference from other electronics, hum can be caused by poor wire shielding. In this case, the background appears when the headphone wire or the connector to which they are connected comes into contact with metal. Most often, this situation manifests itself when connecting headphones to the line output on the front panel of a personal computer. This output connects to motherboard using very flimsy wires that are exposed to a metal casing system unit, which leads to background noise in the headphones. To get rid of the hum, just move these wires. But this will not completely solve the problem - to prevent the background from appearing again, you need to either cover the case with aluminum foil from the inside, or simply connect the headphones to another connector - for example, on the speakers or on the back wall of the computer.
One more possible problem, causing background noise in the headphones - a breakdown of the sound card or a malfunction of its drivers. If the board is broken, you will have to replace it or repair it at a service center. You can replace the drivers yourself. To do this, you should find out the sound card model in the device manager, which is available in the properties menu of the computer running the operating system. Windows systems. After this, you need to go to the sound card manufacturer’s website and download the necessary software.
Background in headphones when connected to a phone
If the headphones are connected not to the computer, but to a mobile phone, the background noise may be caused by a mismatch between the headphone plug and the connector on the smartphone. The fact is that headphones manufactured before 2011 and after 2011 have a different order of contacts on the plug.
TRS (tip, ring, sleeve) plug used in headphones and headsets for mobile phones, has four contacts, two of which are used for audio output, the third for audio input from the microphone and the fourth is ground. In headphones produced after 2011, the order of connecting the contacts has changed - the ground and microphone have swapped places. The connector in phones has changed accordingly. Therefore, when connecting old headphones to a modern phone or vice versa, the connection may not occur correctly, which leads to the appearance of hum in the speakers - the device is not grounded as it should.
Causes of other sound distortions
The background is not the most common, although it is the most unpleasant of possible sound distortions produced by dynamic headphone drivers. Much more often the sound simply becomes quieter, then louder, wheezing, creaking. This can manifest itself in any conditions, or only at certain frequencies, at a certain volume, or when connected to a specific sound source. The reasons for this behavior of headphones, accordingly, can be very different.
Before understanding possible breakdowns, it is worth excluding the simplest options. Thus, the sound may be distorted in a situation in which headphones are usually used due to their indispensability - namely, when listening to the radio from a phone. In this case, headphones play the role of an antenna, so without them the FM receiver simply does not work. If the sound is distorted in exactly this situation, the reason is most likely not in the headphones themselves, but in the radio - either the radio receiver is faulty, or the place where you are has poor reception.
But this is a very special case. In general, headphones squeak and wheeze, usually due to mechanical stress on the plug and wires of the device. In order for the headphones to work properly and the sound in them to be clear, the wire must be solid, and its ends must be securely connected to the contacts on the plug and on the speaker. Thus, the design of the headphones is very simple, but often fragile - careless handling of the device and regular mechanical impact on it, especially at the points of contact of the wire with other parts, leads to the cable fraying, losing its insulation, which is why distortions appear sound.
All causes of wheezing and squeaking in one way or another come down to cable damage. This can happen in three areas:
- at the junction of the wires with the dynamic emitter;
- in one of the places along the entire length of the cable;
- where the wire connects to the plug.
Due to the loss of insulation, the wires carrying the signal for different channels interfere with each other, which leads to sound distortion. If the wire moves away from the contacts, the sound will first begin to deteriorate and then disappear completely, so the cause of wheezing must be eliminated immediately after detection, so that the headphones do not completely break.
Cable repair
Unlike broken copper wires, which can be detected with a multimeter, loose wire insulation is not so easy to detect. To do this, you will have to carefully examine every millimeter of the cable length, twisting it in all directions until the sound stops being distorted. Once you find a place where the sound is clear again, the damage can be repaired. In this case, there is no need to cut the wire.
In the designated place, use a sharp utility knife to clean off the cable braid. Under it you will find three wires - two of them conduct the signal to the speakers, while the third grounds the device. They all must be separated from each other. To restore damaged insulation, simply wrap each wire with electrical tape and then cover the repair area with heat-shrink tape.
Plug repair
Sound distortion can be caused by two problems with the plug:
- wires moving away from contacts;
- contact of individual wires with each other.
In any case, the easiest way is to replace the plug. To do this, the old part is cut off, the cable is stripped of windings and insulation. After this, the bare wires are soldered to the corresponding contacts at the base of the new plug and reliably isolated from each other.
Speaker repair
This operation is not so simple and is only possible if the headphone housing is easily disassembled - if disassembling the plastic housing of the speakers is not provided, repair simply does not make sense - even if the sound is corrected, it will still be impossible to use the headphones.
If there are screws on the headphone body that hold individual parts together, and you can disassemble it, do so. The copper wires of the cable must be attached to the emitter - if one of them is not held securely, solder it. Contacts must be insulated.
Thus, it is possible to correct sound distortion, but it is not always easy. Before attempting to repair your headphones, make sure that the problem is with them and not with other equipment.
Despite the ease of operation, sometimes we still encounter certain problems, such as extraneous sounds similar to hissing and wheezing, due to which the overall sound quality deteriorates significantly. To fix this problem, you need to know possible reasons her appearance.
It is important to know that, despite all the elementary of this device, to a person who has not previously had to deal with problems in his work and eliminate them, this problem may seem very serious.
In order to understand where the hiss in headphones comes from, you need to understand at least a little about how they work. Pay attention to whether you hear hissing sounds constantly or only periodically.
One of the reasons why this problem may occur is the incorrect connection of the headphones, or rather, the selection of the wrong settings. In addition, if the headphones are not new, check whether the contacts with which you connect them are working properly.
Recommendations: How to warm up your headphones correctly and whether you need to do it
How to fix headphones yourself if one stops working
, DIY headphone repair
Noise in headphones caused by faulty sound card
A detail such as a sound card has a direct impact on how well the melody is reproduced by the equipment. If the part is faulty, personal computer cannot accurately transmit sound signals, which is why the normal sound is supplemented by hissing, crackling, and the sound seems to “break” and “jump.” In this situation, only replacing the faulty part will help, and then the sound will no longer be accompanied by extraneous noise.
Faulty wires
The manufacturer of the model is often responsible for the correct operation of the headphones and the correct transmission of sounds.
You should know that there are two types of headphones: wireless and wired. Extraneous sounds, as a rule, appear in models that operate via a cable connected with a plug. If the copper core of the cable is damaged or stretched, noise interference and intermittent interruptions in sound appear.
A damaged wire often leads to noise in the headphones on an iPhone. This is due to the fact that the cable material is thin and flexible, it breaks easily. A damaged conductor sends incorrect signal characteristics to the sound card, and this affects the sound. How to eliminate wheezing in headphones? This can be done by removing the torn or exposed section of the wire; in extreme cases, you will have to buy new fittings.
Broken USB input
Incorrect sound may occur after connecting other gadgets to the USB connector. The problem could be caused by a mouse or a faulty keyboard. In this case, when you press a key, you will hear clicks. There are quite objective reasons why this happens.
When information is transferred, the load on the PC increases. To reduce it, you need to do the following:
1. Switch the plug to another port.
2. You can also purchase a splitter and repair the old connection sockets.
3. Start using wireless devices.
The problem is that very often users do not pay due attention to their computer and do not immediately repair problems that appear. As a result, one after another the USB connectors become unusable, and only one remains, into which a splitter is connected, and it is on it that the entire load falls, which causes its increase.
How to properly wear in-ear headphones
Mouse noise
When you scroll the page with your mouse, sometimes you may also notice noises, sometimes they are simply unbearable. The solution to the problem is to replace the mouse, switch the mouse to a nearby USB port, or install an external sound card.
Lack of grounding of sockets
This problem is not common, but it still occurs, interfering with the normal operation of the headphones. Lack of grounding can also cause crackling, clicking and other noise in the headphones. If you have already checked your headphones and found no problems, also check the outlets to which your computer is connected.
This nuance only applies desktop computers, Laptop boards are usually grounded at the manufacturing stage.
When you use headphones connected to a laptop, incorrect sounds are most likely caused by internal malfunctions of the device. Do not delay in contacting service center, where your device will be diagnosed for problems.
The sound source itself does not work correctly
Violating the rules for using headphones often leads to disruption of their operation, and in particular to the sound. Problems also arise in the operation of the main sound source. Rarely, driver errors still occur. Program errors and malfunctions operating system cause interference in the form of noise and crackling.
The problem can be detected by testing the device by connecting various headsets. If their work is equally unacceptable - unpleasant sounds will be heard in all headphones, then the problem is hidden in the device driver.
If you are used to listening to music at very high volumes, you may also notice the appearance of hissing and crackling. As a rule, this happens if you purchase inexpensive headphones.
Insufficiently powerful power supply is another reason for extraneous noise in the sound of headphones (this problem sometimes occurs among laptop owners who have not yet figured out all its features). Fixing this problem is simple by using the following tips.
On your laptop, go to Control Panel, then System and Security, and finally Power Options, and select High Performance mode. Once setup is complete, check the sound quality in your headphones.